Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Build Thread: 505nm module into host






Actually, you need the plastic sleeve for the diode press to press into a 20mm module also. I have the presses for the 12mm modules and the press is the same, but the sleeve is different.
 
Actually, you need the plastic sleeve for the diode press to press into a 20mm module also. I have the presses for the 12mm modules and the press is the same, but the sleeve is different.

So is that something I can purchase extra on SL's website? Or is that something custom made from members?

-Alex
 
Paul are you saying in order to press the diode into the module? The $80 option he linked already has the diode pressed & driver attached... right??
 
Last edited:
Since the modules are available from DTR, he has the sleeves. This is only needed if you purchase a 20mm module without a diode already pressed in it. For instance, if you are going to use it for a 503nm diode build and are getting the diode from someone besides Jordan.
 
Alex why don't you ask Rich to fashion you a copper host and buy a copper vape battery unit from him too and maybe he can set a 12mm 505nm module in it at the same time.
See my thread.
Just a thought.

RB
 
Alex why don't you ask Rich to fashion you a copper host and buy a copper vape battery unit from him too and maybe he can set a 12mm 505nm module in it at the same time.
See my thread.
Just a thought.

RB

Mmmmmm, don't think I really like that host very much RB, sorry. I like the black host from SL much better! :D

-Alex
 
I plan on buying the pre-installed module w/ the leads Paul & Z. $80 for it :)

-Alex

Then, according to my earlier post, you don't need the sleeve. If you ever see yourself pressing a diode into a 20mm module, that is when you will need one. ;)
 
Hap, their c6 bundle is a little cheaper. You'd need to get the blank contact board, and than pick your color of heat sink ( any would work with the 505) grab the module your looking at from DTR and your good to go. :)

Bargain No-Diode Host Bundle

There's a tutorial at the bottom of their page if you want to take a look at how it's done?

Ps, grab the drill aluminum pill, it will make the build a little easier. Just solder the leads from DTR's module to the blank contact board follow the tutorial and you got photons. :)
 
Last edited:
Hap, their c6 bundle is a little cheaper. You'd need to get the blank contact board, and than pick your color of heat sink ( any would work with the 505) grab the module your looking at from DTR and your good to go. :)

Bargain No-Diode Host Bundle

There's a tutorial at the bottom of their page if you want to take a look at how it's done?

Ps, grab the drill aluminum pill, it will make the build s little easier. Just solder the leads from DTR's module to the blank contact board follow the tutorial and you got photons.

Thanks BobMc,

With this, can I just buy the module & plug it in & be done? Why do I need a blank board? The module already comes with a driver & diode, so all I need is the host, no? :eek:

-Alex
 


Back
Top