Build my 8x and get an 8x !!!!

[dieselmarine]

I recently picked up three LG BH08 burners one when into my comp and i still have the other two... So heres what i want... I want someone to build me my 8x blu ray laser because i have no time alot of training going on right now
i would like it to be atleast 250mW's nice host and heatsink and i would like a glow in the dark o ring in the front i will give who ever wants to do it a brand new LG BH08 8x burner as the payment and ofcourse the other LG burner is for my 8x build let me know what you guys think???
thanks alot

 

[TheGr8Revealing]

what do you mean a glow in the dark o-ring? been looking to get my hands on an 8x.

edit:
sounds like a fair trade. You can check out my pics in my member album for reference to my builds and their quality. also pm sent.

I have harvested and built successfully with this drive before.


http://laserpointerforums.com/members/thegr8revealing/albums/yo/

 

[jeffd]

Ill do it!

 

[daguin]

This is a great deal you offer. I am very willing to do this for you. We will have to figure out what you mean by a "glow in the dark o-ring", and which hosts you might like to use, but I see no problem in not turning this for you in less than a week of receiving the parts.

I have several high quality hosts and drivers here, on hand already.

Also, I too am in Southern California. Maybe we can trade out that other diode (CH08) for the PHR while the packages are moving.

Peace,
dave

 

[dieselmarine]

Here are some pics of a glow in the dark o ring their from iskor12's builds this a nice host something like this would be fine it dont have to have a glow-in-the-dark o ring but i like the idea maybe a gitd lens cover or clicky switch cover pm me with ideas if you want maybe i will like it !!!!!!!

 

[daguin]

Glow in the dark lens covers and clicky covers are easy. I can see how having a GITD cover could prevent you from lighting it with it pointing the wrong way. if all you want is a glowy "end" it should not present much of a challenge.

We could build it in a nice JayRob keychain CR2

or maybe one of his pocket mini kits.

I have a MisterWilling host here, but the GITD ring in front would present a problem. It comes with a focus ring adapter to protect your fingers from the burning light at the lens aperture.

Like this, but in bare aluminum

Peace,
dave

 

[jeffd]

Actually nvm, about me saying i'll do it. Let Daquin build your laser, he is a very reputable member on here and knows how to build a laser.

 

[Archienj7]

@Daguin- a Cree C3 "Sliver" has everything Diesel is looking for, GITD o-rings on the front around the lens and middle and back parts, pretty much water-proof if you build it that way retaining the glass. Kendall @ HTD had the host and my gt some more soon. Gotta use a Flex-drive for such a tiny build and get a sliver heatsink from Dark Horse, which he may have one or two left cause I got one last week. You build your own drivers though don't you? I was going to do this same build but havent had any experience with dr. lava's driver yet, kinda scared to try just yet. :shhh: They are a slick looking host like the one's you posted though, tough choice.

Acutally JayRob may have everything, host heat sink and all.

 

[daguin]

@Daguin- a Cree C3 "Sliver" has everything Diesel is looking for, GITD o-rings on the front around the lens and middle and back parts, pretty much water-proof if you build it that way retaining the glass. Kendall @ HTD had the host and my gt some more soon. Gotta use a Flex-drive for such a tiny build and get a sliver heatsink from Dark Horse, which he may have one or two left cause I got one last week. You build your own drivers though don't you? I was going to do this same build but havent had any experience with dr. lava's driver yet, kinda scared to try just yet. :shhh: They are a slick looking host like the one's you posted though, tough choice.

Acutally JayRob may have everything, host heat sink and all.

Thanks for the reminder, Archienj7.

I also have one of these hosts available here

Peace,
dave

**EDIT** -- Looking at your photos (nice car BTW) it looks like you like lasers that look more like a flashlight. If so, we can use one of these hosts as well

http://laserpointerforums.com/f39/fs-mxdl-host-heatsink-combo-4171-3405-a-22512.html

 

[gotwake424]

Dave, If you have another Kryton you might be able to fit a ring in the head. However, it would make it ever harder to focus it.

 

[daguin]

Dave, If you have another Kryton you might be able to fit a ring in the head. However, it would make it ever harder to focus it.

I think that I'm going to spread the recommendation that no one use a Kryton to build an 8X WITHOUT one of Jayrob's focus ring adaptors. You simply cannot get your fingers in there, to focus it, without burning them :eg:

I burn my fingers in my 6X build

Peace,
dave

 

[gotwake424]

I think that I'm going to spread the recommendation that no one use a Kryton to build an 8X WITHOUT one of Jayrob's focus ring adaptors. You simply cannot get your fingers in there, to focus it, without burning them :eg:

I burn my fingers in my 6X build

Peace,
dave

That is good advise, that would hurt your fingers a lot!!

 

[bryce007]

I think that I'm going to spread the recommendation that no one use a Kryton to build an 8X WITHOUT one of Jayrob's focus ring adaptors. You simply cannot get your fingers in there, to focus it, without burning them :eg:

I burn my fingers in my 6X build

Peace,
dave

Yea I definitely need to have him make me two, then get them anodized to match!

Anyway, Dave is a good person to pick for a build. I hope to confirm that first hand one day

 

[scopeguy20]

Hey Bryce, I do hope you get them anodized and then built, LOL! Cool idea! -Glenn

 

[bryce007]

Hey Bryce, I do hope you get them anodized and then built, LOL! Cool idea! -Glenn

yea, it wouldn't really work the other way around. I think I'll still ask ken just to get a chuckle out of him.

 

[daguin]

SPAM Duplicate Posting

I didn't know where you might check so I am cross-posting this (So sue me)

Your package arrived this afternoon. I have a dinner date tonight. It will probably be Monday before I can get to this.

Man! The broken pins on the one are broken off pretty deeply. I'm sure glad I didn't have to guarantee anything working on it

Thanks for the "artwork" and the seals. They made me smile

Enjoy your leave

Peace,
dave