Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Buck Converter Feeler?

SMD 0603 Resistors E12 Series 86 Value Assortment Kit, 0 to 10M OHM. | eBay
Not sure how many you get in that kit, but it's the first kit I saw that had the 27 ohm resistor.
Here is the one for 5000 SMD's :O
50 Value 0603 SMD Resistor Kit (0R~10MR) 5% 5000 pcs | eBay

I will probably get mine from digikey though. ~$0.01 per resistor and any package less than 8 oz ships for $2.56.
Will probably pick up a couple different types and some LEDs, switches etc...
Can't let that shipping go to waste can we?
 
Last edited:





Remember, it's 0.27. The resistors for these drivers are REALLY small values.
 
I've ordered 50 of both .27 ohm and .47 ohm resistors (size 0603) from digikey.
If someone needs them I wouldn't mind sending a couple your way.
Again, thank you for your help Wolfman29!

PS: Anyone mind chiming in on a good way to connect the driver negative copper band to the case (ie: solder the copper to the driver pill). I've succeeded once by doing a really messy solder blob over some of the threads and then sanding it down, but I'd like to find an easier and more durable method.

I forgot to mention that I also received 20 of the SS34 diodes, so I have both the diodes and the resistors that you need to convert these drivers if anyone needs em...

Wolfman, since my resistors haven't arrived yet I desoldered a 0.27ohm off one of the boards and put it on the other, it registers at 1.5amps with my AW 16340s @ a low voltage. Unfortunately my crap chinese charger decided that it would be a good time to stop working for no reason, so I can't finish the build just yet. Oh well, at least now I have an excuse to order a quality charger, I went with the Sysmax Intellicharge i4 Multifunctional Charger :D
 
Last edited:
I've actually tried those boards... I am not a huge fan, to be honest. Don't remember why....
 
You must log in or register to reply here.


Back
Top