Garoq
0
- Joined
- Aug 27, 2010
- Messages
- 1,525
- Points
- 83
We now have BlitzBuck adjustable drivers back on the Survival Laser stores, in a V5 design!
The BlitzBuck is an original design by Wolfman29 and has long been popular with LPF members.
The BBV5 has been redesigned with the components moved away from the edge of the board to eliminate any shorting issues during assembly and now has silicone insulated lead wires attached!
The BBV5 is still 16.8mm in diameter and is designed to fit C6, S4, SL stainless and other hosts that accept a 16.8mm driver board. All the other specs are the same:
Specifications:
Diameter: 16.84mm +/- .05mm
Input Voltage: 1.2*Vin - 16V
Output Voltage: <1V - 9V
Output Current: 1.5A - 3A (varies slightly per board)
Ripple Current: <100mA
Input Spike Current: <100mA
Efficiency: 85-90%
Circuit Continuity: Isolated D- and D+
Features:
- Thermal shutdown. Will protect your driver (and diode) in the event of driver overheating. Once it reaches the temperature threshold, it will shut down until the main IC drops to a sufficiently low temperature to restart again. However, if left on, it will decrease in temperature, turn on again, and then turn off again due to temperature increase. This will lead to a pulsed effect on the output. This indicates it needs some rest time.
- Soft-start. There is a 1ms soft-start built into the driver to prevent large inrush current spike.
- Open-circuit protection. No current will be drawn and no current will be outputted when the test load or diode is disconnected from the output. It will not damage the driver whatsoever leaving it like this for any amount of time.
- Adjustable. 3mm potentiometer for allowing smooth control over the current output.
Price is the same at $19.99 each. Use the LPF445 code and get a 10% discount.
Note: Pill and brass ring not included, must be purchased separately.
In addition, Wolfman29's Blitz Linear drivers are in stock and will be available on the stores very soon. I will make a separate announcement when they are ready for sale.
Thanks!
The BlitzBuck is an original design by Wolfman29 and has long been popular with LPF members.
The BBV5 has been redesigned with the components moved away from the edge of the board to eliminate any shorting issues during assembly and now has silicone insulated lead wires attached!
The BBV5 is still 16.8mm in diameter and is designed to fit C6, S4, SL stainless and other hosts that accept a 16.8mm driver board. All the other specs are the same:
Specifications:
Diameter: 16.84mm +/- .05mm
Input Voltage: 1.2*Vin - 16V
Output Voltage: <1V - 9V
Output Current: 1.5A - 3A (varies slightly per board)
Ripple Current: <100mA
Input Spike Current: <100mA
Efficiency: 85-90%
Circuit Continuity: Isolated D- and D+
Features:
- Thermal shutdown. Will protect your driver (and diode) in the event of driver overheating. Once it reaches the temperature threshold, it will shut down until the main IC drops to a sufficiently low temperature to restart again. However, if left on, it will decrease in temperature, turn on again, and then turn off again due to temperature increase. This will lead to a pulsed effect on the output. This indicates it needs some rest time.
- Soft-start. There is a 1ms soft-start built into the driver to prevent large inrush current spike.
- Open-circuit protection. No current will be drawn and no current will be outputted when the test load or diode is disconnected from the output. It will not damage the driver whatsoever leaving it like this for any amount of time.
- Adjustable. 3mm potentiometer for allowing smooth control over the current output.
Price is the same at $19.99 each. Use the LPF445 code and get a 10% discount.
Note: Pill and brass ring not included, must be purchased separately.
In addition, Wolfman29's Blitz Linear drivers are in stock and will be available on the stores very soon. I will make a separate announcement when they are ready for sale.
Thanks!
Last edited:
)
