Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

BDR-209/3.8mm Sled Harvest and Testing

BTW, existotem and techood are the same company. I just found that out when I opened a dispute on existotem and Robinson from techood answered me. I couldn't tell you why they have different prices, but they are the same company.
 
  • Like
Reactions: GSS





Wouldn't surprise me a bit. Sometimes you need a play book just to keep track of all the players.
 
Remember DinoD saying THEY would no longer sell lasers... then several 'new' sellers appeared and ALL were DD clones.. They denied...but all had SAME FAX there is yr clue...

will go for ~10 too if a GB is ran...
 
I know we can get them under $20 if we do a GB and I would be good for at least (5) myself. How much under $20 who knows? The cheapest I have purchased the sleds were at $16. I have offered techhood $23 for a single sled and the offer was accepted so I'm guessing that's close to bottom dollar for singles.
 
Hi,
They will down more with multiple units purchased on some items . iv'e done it and some great buys to there not to bad with some stuff. I purchased quite a few sleds and diodes from them. You might have to wait a bit ,but you save a lot of cash in the long run.

Rich:)
 
Last edited:
Excellent Rich !
Can't wait to see the build you come up with.

RB

:beer:
 
  • Like
Reactions: GSS
Hi RB,
Thank you, Tearing down these sleds are great i did about 5 so far plus this one and have 2 sleds . It seems working for it gives some self satisfaction and achievement . iIhave a lot of hosts so it's going to be tuff to decide. It will be raining here a lot today so i'll have time to set the driver and build one. I'll be using a X Boost for the build, i have some nano drivers but have to see how to set the ranges on them never used them before . Maybe a Sinner full CU Magic Pen i have a few of those and they look great when i throw them on the polishing wheel with some rouge and buff them.

Rich:)
 
Last edited:
Yep that's one tough little guy there, looks like fun, put him in a nice small stainless host.🔦
 
HiBBB,
hey i think i have a SL / SS ? CU sink eating around hmmm .. I have a few hosts tough decisions lol !!

Like it said couldn't make up my mind, i put it in an SL /SS then hey AL & CU are better together so i did it all over in a SL /AL with a CU sink . man i love this hobby pics my brain LOL .
Well here are some pics of the finished build.
In It Is;

1) SL /AL host with a full CU heat sink..
2) Harvested BDR-209/405NM diode
3) X Boost set to 580mA and bridged to the second range
4) G2 Lens
5) Home Made focus adapter from 4 AiXiz lens rings..

Rich:)
 

Attachments

  • IMG_1932.JPG
    IMG_1932.JPG
    163.3 KB · Views: 41
  • IMG_1934.JPG
    IMG_1934.JPG
    158.6 KB · Views: 38
  • IMG_1935.JPG
    IMG_1935.JPG
    142.5 KB · Views: 33
  • IMG_1936.JPG
    IMG_1936.JPG
    216.4 KB · Views: 43
  • IMG_1937.JPG
    IMG_1937.JPG
    152.2 KB · Views: 29
Last edited:





Back
Top