Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

9 Amp PT-54 Phlatlight Maglite Mod!

i want to try one of the Blue Phlat lights (i keep on reading them as FAT LIGHTS lol) to see if it will ursup the Blue laser in the projector and gimme a good image.

if anyone has a link to them please let me know k?


thanks

Keith.
 





Kobra000 said:
GTID material? are you referencing the phosphor wheel? just so we are on the same page im planning on using this in a Ca*io xj-a140,2xx projector.

any info is greatly appreciated

Keith.
Click to expand...

GITD (glow in the dark) material...

Blu-ray and 445 diodes make GITD material glow. So possibly that PT-54 blue emitter will also do the same... :cool:
 
iv jsut ordered my green LED iv already got the red and at some point i want the blue

is it any good as a white light torch or is it not worth it because of size and focusing of the led's ?
 
jackmanuk said:
iv jsut ordered my green LED iv already got the red and at some point i want the blue

is it any good as a white light torch or is it not worth it because of size and focusing of the led's ?
Click to expand...

You mean to combine all three to get white?

I'm sure it can work, but it would not be practical in a hand held...

Too much current demand / heat / etc...

I have a 1000 lumen white torch here: :cool:
http://laserpointerforums.com/f64/f...ltage-monitor-parts-complete-light-59581.html
 
ah might have to treat myself to one at some point but iv still got my green build to fund as well as finishing off my laser
 
jayrob said:
Yet another Phlatlight mod!

The voltage demand (per the data sheet) for the green PT-54 is 4.9 vs 2.6 for the red. (I measured 4.3 for the Green PT-54, and 2.2 for the red)

My battery current draw on this Green PT-54 build is 6.7 Amps vs 3.8 Amps for the Red PT-54. And of course that means it gets warmer too...
Click to expand...

Received my green PT-54 today and its safe to say its bright and energy hungry 4.6v @ 8 amps :drool:

i had to double up my test leads as there rated for 3A

Also warn is an understatement i have the thing screwed to a CPU heatsink and the hole sink is warm to the touch after only a couple of minutes

4dd9d970.jpg


ec6ceca1.jpg








cant wait till its dark out :lasergun:
 
found an easy way to solder to these contacts just now: i had real trouble soldering to the contacts : most probily because my soldering iron is only 18W (used them in school and like it as its small) not the 60w thats been said on here i managed to get the negative wire on ( F knows how its just stuck like superglue) but couldnt get the positive on to save its life so i thought to ignore the gold coating and put 2 divits with a 2.4mm drill bit into the positive terminal to get to the rich copper underneath , filled the divets with solder and tinned the wire and its all bonded perfectly first time



sorted



p.s. i need to fit a lens and iv got no clue how im going to do that somthing adjustable would be good maybe fit the lens in a bracket and use a screw to focus either way i have no lath and minimal tools


any ideas?
 
jackmanuk said:
found an easy way to solder to these contacts just now: i had real trouble soldering to the contacts : most probily because my soldering iron is only 18W (used them in school and like it as its small) not the 60w thats been said on here i managed to get the negative wire on ( F knows how its just stuck like superglue) but couldnt get the positive on to save its life so i thought to ignore the gold coating and put 2 divits with a 2.4mm drill bit into the positive terminal to get to the rich copper underneath , filled the divets with solder and tinned the wire and its all bonded perfectly first time



sorted



p.s. i need to fit a lens and iv got no clue how im going to do that somthing adjustable would be good maybe fit the lens in a bracket and use a screw to focus either way i have no lath and minimal tools


any ideas?
Click to expand...

First post shows one way to have it be focus-able...
 
ah yes but im to poor to be ordering cool stuff like that im already saving for one of your 1000 lumen torches (with voltage monitor) :whistle:
 
lol you dont have to convince me to buy one im already saving my pennies for one i can tell by your reputation how good it will be :bowdown:
 
That's cool...

Nothing speaks better than buyer feedback, and I have collected it all together in one post. Zero bad feedback... :)

I mention the link from time to time just so others that may read the thread or post, might also take a look at it... :beer:
 
Last edited:
sounds like someone needs a feedback sticky or maybe a website like DTR's page with all your laser and torches for sale and a feedback page .ect
 
You must log in or register to reply here.


Back
Top