5W CO2 LASER TUBE & RF AMPLIFIER $150 DELIVERED!

[heruursciences]

Co2 LASER BLOW OUT!!!!!

Lasing tubes 4 to 7W output with RF amplifier assembly! TESTED WORKING!
Yes you read it right! THAT"s only $150 FOR A WORKING RF CO2 LASER DELIVERED! in the USA or $175.00 ABROAD!

Also:
Weak or DOA tubes: LOT of 5 Tubes for $100 in the usa!, $145 delivered anywhere in the world!


Hopefully there will be interest in these!

HAPPY CAMPERS!

Schrecken_Licht: Traded a YAG laser for one! TRACK No. 03081400000060400903 DELIVERED!!! HAPPY!

LikeitBright: In for 1 system SHIPPED TRACK No. CP821680835US, DELIVERED HAPPY!

Medusa: In for 1 system, SHIPPED! Track No: CP821680844US, DELLIVERED HAPPY!

Tottish: In for 1 plug and play system. CONFIRMED! PAID UP!
SHIPPED! 11/13/2008! Track number is: CP821680929US DELIVERED! HAPPY!

Hemlock Mike: In for 1 plug and play system. CONFIRMED! PAID UP!
SHIPPED! 11/13/2008! Track number is: 03081400000060400637 DELIVERED! HAPPY!

disma: In for 1 plug and play, 1 with tube an board. CONFIRMED! PAID UP!
SHIPPED! 11/14/2008! Track number is: 03081400000060400606 DELIVERED! HAPPY!

spikec: In for 1 plug and play system. CONFIRMED! PAID UP!!!
SHIPPED! 11/13/2008! Track number is: 03081400000060400484 DELIVERED! HAPPY!

Scopeguy: In for 1 plug and play system, CONFIRMED! PAID UP!
SHIPPED! 11/13/2008! Track number is: 03081400000060400835 DELIVERED! HAPPY!

Gimp: In for 1 tube and board type. CONFIRMED PAID UP!
SHIPPED! 11/13/2008! Track number is: 03081400000060400668 DELIVERED! HAPPY!

 

[ndrew2505]

Re: CO2 LASER TUBE BLOW OUT $85 to $110 DELIVERED!

WHY DO YOU HAVE SO MANY GOOD DEALS WHEN IM BROKE? : j/k but i am broke....nice deal man

 

[potatorage]

Re: CO2 LASER TUBE BLOW OUT $85 to $110 DELIVERED!

I want a "plug and play" one, cost of it?

 

[Hemlock_Mike]

Re: CO2 LASER TUBE BLOW OUT $85 to $110 DELIVERED!

Chris --

You show me with only one --- I have 3 and I'm HAPPY ;D

Mike

 

[ndrew2505]

Re: CO2 LASER TUBE BLOW OUT $85 to $110 DELIVERED!

one of these would have been awesome for the cnc table im building... just curious but what would be the price for a plug and play?

 

[heruursciences]

Re: CO2 LASER TUBE BLOW OUT $85 to $110 DELIVERED!

picture of the tube, the arf power mosfet sub assembly, and the osc/preamp board. You'll need 5v at 300mA, 12V at 4A, and 32 to 38V at 10A

 

[heruursciences]

Re: CO2 LASER TUBE BLOW OUT $85 to $110 DELIVERED!

A picture of the unitt showing what you get, It has all the critical RF drive components tuned in, tweeked, and set up ready to run! Just add 32-38V at 8A and 12v at 4A and 5V at 250mA use the driver board shown above! Alternately, you may even drive the laser tube's RF amplifier with an old CB radio and send your voice over the laser's beam! WAY COOL!

 

[heruursciences]

Re: CO2 LASER TUBE BLOW OUT $85 to $110 DELIVERED!

Plug and play units are $85.00 in the USA! You will need either 32-38V @ 10A plus a 5W CB radio, OR the optional RF pre-amp Driver board and 5v at 300mA, 12V at 4A to run it. I will not make turn key systems out of these for legal reasons.

 

[heruursciences]

Re: CO2 LASER TUBE BLOW OUT $85 to $110 DELIVERED!

whaaaa no interest? :-?

 

[nightstick]

Re: CO2 LASER TUBE BLOW OUT $85 to $110 DELIVERED!

Im going for a total of three Now I love them thanks Chris for the Great Deals

 

[suiraM]

Re: CO2 LASER TUBE BLOW OUT $85 to $110 DELIVERED!

Don't suppose you have a suitable fiber to carry the output?

One of the lower powered tubes (say 8W or so) would do a decent job of soldering, if I remember correctly. With my fine motor tremors, soldering with a regular iron is virtually impossible. Fiber delivered laser, however, is quite another matter, since I don't have to compensate for the same weight.

I had been planning to use a bunch of PHRs to do that, but a CO2 laser seems like the more attractive solution.

 

[iewed]

Re: CO2 LASER TUBE BLOW OUT $85 to $110 DELIVERED!

How would we hook up the CB radio?

 

[GooeyGus]

Re: CO2 LASER TUBE BLOW OUT $85 to $110 DELIVERED!

How much extra is the optional RF preamp Driver board?

 

[heruursciences]

Re: 5W CO2 LASER TUBE & RF AMPLIFIER $150 DELIVERE

Price has been changed a bit since i went ahead and set them up with the RF drive electronics! $150 DELIVERED for a working co2 laser that is AIR COOLED is dirt cheap!

 

[acro-ii]

Re: 5W CO2 LASER TUBE & RF AMPLIFIER $150 DELIVERE

So, are these now turnkey, or do we still have to provide the power?

 

[heruursciences]

Re: 5W CO2 LASER TUBE & RF AMPLIFIER $150 DELIVERE

A DC power supply is required to run them, I cannot make them turn key for legal reasons, mainly having to do with the RF shielding needed for CDRH compliance.