- Joined
- Sep 8, 2014
- Messages
- 124
- Points
- 18
Re: Adam's Leaving Lasers Sale
Payment sent for one of the JAD C6 kits and one of the A140 diodes.
Payment sent for one of the JAD C6 kits and one of the A140 diodes.
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
445 9mm diode, Laser Protection Goggles, and 5.6mm copper modules
- Thread starter adam1
- Start date
adam1
0
- Joined
- Jan 22, 2013
- Messages
- 55
- Points
- 8
Re: Adam's Leaving Lasers Sale
Ok so the CD mailers are exactly the same inner dimensions as a CD jewel case. They're good for diodes or a couple of drivers, but not much else. I think I've PM'd everyone back who contacted me, so shoot me another PM if I've missed you.
Regarding keeping the items in Australia the majority of this stuff was a breeze to get past customs. The only things that would actually be prohibited to import are the completed Kryton and the Red/Green C6s. Others items are only components and as such you are allowed to recieve them. I may have been more inclined to try to keep the lasers themselves in Australia if there was more interest from Australians, but so for there has been none. I'll see what happens regarding interest but at the moment I am not going to turn away interested buyers now for the chance that an Australian might want them later.
Ok so the CD mailers are exactly the same inner dimensions as a CD jewel case. They're good for diodes or a couple of drivers, but not much else. I think I've PM'd everyone back who contacted me, so shoot me another PM if I've missed you.
Regarding keeping the items in Australia the majority of this stuff was a breeze to get past customs. The only things that would actually be prohibited to import are the completed Kryton and the Red/Green C6s. Others items are only components and as such you are allowed to recieve them. I may have been more inclined to try to keep the lasers themselves in Australia if there was more interest from Australians, but so for there has been none. I'll see what happens regarding interest but at the moment I am not going to turn away interested buyers now for the chance that an Australian might want them later.
- Joined
- May 12, 2013
- Messages
- 749
- Points
- 43
Re: Adam's Leaving Lasers Sale
I'm here
Honestly, if I saw this thread sooner I would've bought the lot :evil:
Usually that's not the problem. The Australian dollar has been plummeting like a rock and paypals exchange rate is much worse. To purchase goods outside of aus it means that whatever the listed price is, one would pay 40% on top of that (including shipping). It makes it incredibly expensive to buy laser parts outside of aus. That's why I would obviously much prefer to purchase locally, one ends up saving almost 50% or more (in this case since your prices are quite reasonable).
If others have not claimed said items or have otherwise backed out I would like to purchase:
Eagleeye 610-740nm
3X copper modules
2X cc-boost pcbs (only if your willing to part with such a small quantity)
2X lpc826
2X benboost drivers
1X a140 diode
1X JAD host
5.6mm diode press
Again, only if said items have not been claimed or if members have otherwise backed out. I understand others have
already claimed a few things that I have mentioned but just getting in second (or third) in case they pull out
The acronym JAD usually denotes that the host comes with a driver. If so what driver is used and at what current is it set?
I'm here
Honestly, if I saw this thread sooner I would've bought the lot :evil:
Usually that's not the problem. The Australian dollar has been plummeting like a rock and paypals exchange rate is much worse. To purchase goods outside of aus it means that whatever the listed price is, one would pay 40% on top of that (including shipping). It makes it incredibly expensive to buy laser parts outside of aus. That's why I would obviously much prefer to purchase locally, one ends up saving almost 50% or more (in this case since your prices are quite reasonable).
If others have not claimed said items or have otherwise backed out I would like to purchase:
Eagleeye 610-740nm
3X copper modules
2X cc-boost pcbs (only if your willing to part with such a small quantity)
2X lpc826
2X benboost drivers
1X a140 diode
1X JAD host
5.6mm diode press
Again, only if said items have not been claimed or if members have otherwise backed out. I understand others have
already claimed a few things that I have mentioned but just getting in second (or third) in case they pull out
The acronym JAD usually denotes that the host comes with a driver. If so what driver is used and at what current is it set?
Last edited:
- Joined
- Mar 11, 2009
- Messages
- 897
- Points
- 0
Re: Adam's Leaving Lasers Sale
aypal: Thanks!! I only need maybe 1 more thing then I can leave the laser hobby also.
aypal: Thanks!! I only need maybe 1 more thing then I can leave the laser hobby also.
Last edited:
RGB
0
- Joined
- Dec 15, 2013
- Messages
- 46
- Points
- 0
Re: Adam's Leaving Lasers Sale
aypal:
aypal:
adam1
0
- Joined
- Jan 22, 2013
- Messages
- 55
- Points
- 8
Re: Adam's Leaving Lasers Sale
P'm everyone back and just updating the OP with stuff that is sold/spoken for. Anything that is paid for I either sent today or will be sending tomorrow. With the JAD kits, they did have BenBoosts in them set at 1.267A, but they have both been sold. Also price dropped a bit on the Kryton as 2.5W-3W is only an estimate based on driver current setting.
P'm everyone back and just updating the OP with stuff that is sold/spoken for. Anything that is paid for I either sent today or will be sending tomorrow. With the JAD kits, they did have BenBoosts in them set at 1.267A, but they have both been sold. Also price dropped a bit on the Kryton as 2.5W-3W is only an estimate based on driver current setting.
Last edited:
RGB
0
- Joined
- Dec 15, 2013
- Messages
- 46
- Points
- 0
Re: Adam's Leaving Lasers Sale
Hey, Adam,
Can you reserve the Cryton for me? And not ship the LPM if you haven`t yet? Ill know in max. 24 hours, if I want it or might make an offer. But I first have to talk to a friend...
Hey, Adam,
Can you reserve the Cryton for me? And not ship the LPM if you haven`t yet? Ill know in max. 24 hours, if I want it or might make an offer. But I first have to talk to a friend...
Alaskan
0
- Joined
- Jan 29, 2014
- Messages
- 12,025
- Points
- 113
Re: Adam's Leaving Lasers Sale
Payment sent for the 60 bare and 15 populated Benboost drivers.
Edit: please confirm paypal shows my Alaska shipping address.
Payment sent for the 60 bare and 15 populated Benboost drivers.
Edit: please confirm paypal shows my Alaska shipping address.
Last edited:
adam1
0
- Joined
- Jan 22, 2013
- Messages
- 55
- Points
- 8
Re: Adam's Leaving Lasers Sale
Posted everything that has been paid for except yours Alaskan, and I'll get that in the post tomorrow. Updating the OP now with what is left
Posted everything that has been paid for except yours Alaskan, and I'll get that in the post tomorrow. Updating the OP now with what is left
Pman
0
- Joined
- Nov 28, 2012
- Messages
- 4,441
- Points
- 113
Re: Adam's Leaving Lasers Sale
Sorry WM as I haven't been back to check if anyone from AUS had stopped in to buy or I would have let you have the stuff. Has been paid for and shipped now. Hopefull you ended up with a bunch of stuff still.
Sorry WM as I haven't been back to check if anyone from AUS had stopped in to buy or I would have let you have the stuff. Has been paid for and shipped now. Hopefull you ended up with a bunch of stuff still.
Last edited:
adam1
0
- Joined
- Jan 22, 2013
- Messages
- 55
- Points
- 8
Re: Adam's Leaving Lasers Sale
Prices dropped again and updated with what's left
Prices dropped again and updated with what's left
Last edited:
hakzaw1
0
- Joined
- Apr 2, 2009
- Messages
- 10,661
- Points
- 113
Re: Adam's Leaving Lasers Sale
I have heard many times from LPF members there not being able to import.
we are quite lucky in USA.
it takes extra passion for lasers to own/collect them in Aus.
once items are spoken for -don't expect to hear from them.
so the question should not be "Do You have buyers in country?"
but.. 'Are there buyers in that country?' and the answer is yes.
n/m too late for them .. best of luck ..adam.
hak
I have heard many times from LPF members there not being able to import.
we are quite lucky in USA.
it takes extra passion for lasers to own/collect them in Aus.
once items are spoken for -don't expect to hear from them.
so the question should not be "Do You have buyers in country?"
but.. 'Are there buyers in that country?' and the answer is yes.
n/m too late for them .. best of luck ..adam.
hak
Last edited:
RGB
0
- Joined
- Dec 15, 2013
- Messages
- 46
- Points
- 0
Re: Adam's Leaving Lasers Sale
I got the LPM! Thanks!
I got the LPM! Thanks!
- Joined
- Sep 8, 2014
- Messages
- 124
- Points
- 18
Re: Adam's Leaving Lasers Sale
Got my JAD kit today with the a140 super fast shipping thank you sir just one question the leads from the driver are blue and green which is positive and which is negative?
Thanks again
Got my JAD kit today with the a140 super fast shipping thank you sir just one question the leads from the driver are blue and green which is positive and which is negative?
Thanks again