Hi, I was wondering if anyone knows the thread on the 301/303 lasers. I plan on 3d printing an attachment so I can power my laser with a power supply easier, but am unable to figure out the thread of the main tube. Thanks!
please post an introduction in the welcome section first and add a general geo location to your profile, members really like that. just measure the threads!
Don't go cheap with gauges even if you only use it a few times. Not the issue of wearing down but they can be very inaccurate.
Go with something like a Starrette.
You've got some good advice here; nothing beats the right tool for the job, but with calipers, you can get a good idea of what you have there.
Measure the O.D., it will be a metric size; the O.D. will be smaller than the nominal thread size, for instance, if it measures 23.7mm, it's most likely a 24mm thread, be careful though, because there isn't a lot of quality control with these cheap Chinese parts.
Next, if you're careful, you can measure the thread pitch with your calipers also. Just measure the distance between the peaks of the threads, it will probably be a fraction of a millimeter, such as 0.5mm, 0.75mm, or most likely with that host, I'd guess it to be 1.00mm pitch.
Just to repeat, nothing beats having the proper tools.
Hi,
ok this is what you need together ,is a metric thread gauge . They aren't that much money and are cheap. This way you will find the correct size thread.