LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
>1w handheld Green laser wanted
- Thread starter daisystar
- Start date
Safety comes first, especially if you have no knowledge of lasers or laser safety and are asking about 1W or greater output powern lasers. Permanent eye damage can occur/happen in less than the blink reflex time or 0.25 seconds . Don't be an accident looking for a place to happen.
See Laser Hazard Chart here: https://www.lasersafetyfacts.com/resources/FAA---visible-laser-hazard-calcs-for-LSF-v02.png
See also best laser safety web site here: https://www.laserpointersafety.com/
For any laser over with an output >5mW you will need laser glasses/goggle to protect your eyes from damage.
You can get good quality laser goggles here: https://www.survivallaser.com/Safety_Goggles/cat556089_826120.aspx
See what happened to one member in less than 1 second w/o laser glasses from a 1W blue laser here: https://laserpointerforums.com/threads/hit-in-eye-with-1000mw-445nm-blue-laser.69469/
The above having been said, for excellent quality hand held lasers sold by the manufacturer not 1001 resellers of junk lasers see: Sanwu Lasers https://www.sanwulasers.com/ and JetLasers https://www.jetlasers.org/index.php
See Laser Hazard Chart here: https://www.lasersafetyfacts.com/resources/FAA---visible-laser-hazard-calcs-for-LSF-v02.png
See also best laser safety web site here: https://www.laserpointersafety.com/
For any laser over with an output >5mW you will need laser glasses/goggle to protect your eyes from damage.
You can get good quality laser goggles here: https://www.survivallaser.com/Safety_Goggles/cat556089_826120.aspx
See what happened to one member in less than 1 second w/o laser glasses from a 1W blue laser here: https://laserpointerforums.com/threads/hit-in-eye-with-1000mw-445nm-blue-laser.69469/
The above having been said, for excellent quality hand held lasers sold by the manufacturer not 1001 resellers of junk lasers see: Sanwu Lasers https://www.sanwulasers.com/ and JetLasers https://www.jetlasers.org/index.php
You are probably out of luck and not going to find any being sold from within the UK to customers within the UK,
To much trouble for very little profit/no money to be made with thousands of Chinese resellers on the internet offering at low prices and free shipping.
Have not seen or heard of any resellers of of high power hand hald lasers in UK in last 10 years and none are manufactured in UK + EU wide limit is 1mW or less.
People in UK who want them buy from overseas sellers and import them.
Doubt there are going to be any for sale in UK over 1mW or less.
Bottom line: A laser from Sanwu or JetLasers gets to anywhere in the UK in 3 to 6 days via DHL wothout any problems so, you are not going to find any sold within the UK
Additionally advice of the UK authorities and Public Health England is as follows:
"PHE advises that the sale of laser products to the general public for use as laser pointers should be restricted to Class 1 or Class 2 devices which should be classified in accordance with the requirements of the current British Standard and should be sold with sufficient accompanying information to enable the user to operate the product in a safe manner. Toys should be Class 1 or of such low output that they do not need to be classified.
PHE advice to the Department for Business, Energy and Industrial Strategy (BEIS) for Trading Standards authorities is that if consumer products containing lasers are restricted to Class 1 or Class 2, eye injuries are unlikely to occur. Class 1M, Class 2M and Class 3R laser products may be acceptable for use by consumers where the manufacturer has concluded that the accessible laser beam is necessary for the intended application and has assessed that the risk of eye injury is very low.
Trading Standards Authorities may use their existing powers under the General Product Safety Regulations 2005[footnote 4] to remove laser products intended for consumers of Class 3B and Class 4 (as defined in the British Standard) from the general market. However, it is recognised that consumers also purchase products direct via the Internet and while on overseas holidays, which is difficult to control."
See: https://www.gov.uk/government/publi...n-safety-advice/laser-radiation-safety-advice
See also 2018 GOV.UK news: https://www.gov.uk/government/news/government-to-clamp-down-on-unsafe-lasers
See UK LPF member CurtisOliver's write up about UK regulations here: https://laserpointerforums.com/threads/new-laser-laws-uk-20th-december-2017.102055/#post-1510290
To much trouble for very little profit/no money to be made with thousands of Chinese resellers on the internet offering at low prices and free shipping.
Have not seen or heard of any resellers of of high power hand hald lasers in UK in last 10 years and none are manufactured in UK + EU wide limit is 1mW or less.
People in UK who want them buy from overseas sellers and import them.
Doubt there are going to be any for sale in UK over 1mW or less.
Bottom line: A laser from Sanwu or JetLasers gets to anywhere in the UK in 3 to 6 days via DHL wothout any problems so, you are not going to find any sold within the UK
Additionally advice of the UK authorities and Public Health England is as follows:
"PHE advises that the sale of laser products to the general public for use as laser pointers should be restricted to Class 1 or Class 2 devices which should be classified in accordance with the requirements of the current British Standard and should be sold with sufficient accompanying information to enable the user to operate the product in a safe manner. Toys should be Class 1 or of such low output that they do not need to be classified.
PHE advice to the Department for Business, Energy and Industrial Strategy (BEIS) for Trading Standards authorities is that if consumer products containing lasers are restricted to Class 1 or Class 2, eye injuries are unlikely to occur. Class 1M, Class 2M and Class 3R laser products may be acceptable for use by consumers where the manufacturer has concluded that the accessible laser beam is necessary for the intended application and has assessed that the risk of eye injury is very low.
Trading Standards Authorities may use their existing powers under the General Product Safety Regulations 2005[footnote 4] to remove laser products intended for consumers of Class 3B and Class 4 (as defined in the British Standard) from the general market. However, it is recognised that consumers also purchase products direct via the Internet and while on overseas holidays, which is difficult to control."
See: https://www.gov.uk/government/publi...n-safety-advice/laser-radiation-safety-advice
See also 2018 GOV.UK news: https://www.gov.uk/government/news/government-to-clamp-down-on-unsafe-lasers
See UK LPF member CurtisOliver's write up about UK regulations here: https://laserpointerforums.com/threads/new-laser-laws-uk-20th-december-2017.102055/#post-1510290
Last edited:
- Joined
- Jun 12, 2015
- Messages
- 7,610
- Points
- 113
Encap quoted nicely key parts of my UK laser laws write up that explain why you won’t find high power lasers unless you import. So I won’t repeat it all. Read the thread if you have time. The only Class IV products I know of in the UK that are sold are ones intended for education or business settings. You won’t find Class IV handhelds here.
- Joined
- Dec 15, 2014
- Messages
- 6,783
- Points
- 113
Hi,
As Gazer said you can order a 520nm diode , driver and lens from DTR and have a host shipped to you . Then all you do is solder two wires together with heat shrink tubing and slide in the laser module. This way you wont need to worry about customs. Or Jet lasers or Sanwu will ship but the customs might seize your package.
last but most important is a pair of safety glasses for the particular wave length and use the build in a correct manner.
Rich
As Gazer said you can order a 520nm diode , driver and lens from DTR and have a host shipped to you . Then all you do is solder two wires together with heat shrink tubing and slide in the laser module. This way you wont need to worry about customs. Or Jet lasers or Sanwu will ship but the customs might seize your package.
last but most important is a pair of safety glasses for the particular wave length and use the build in a correct manner.
Rich
hakzaw1
0
- Joined
- Apr 2, 2009
- Messages
- 10,662
- Points
- 113
OdicForce
OdicForce Lasers Online Shop. Laser Modules, Laser Diodes, Laser Drivers, Lenses etc. for professional and enthusiast users. Information Sheets and Project Guides.
but take a look--hak
UPDATE
Our time and help once again gets dissed. No good deed goes unpunished.
another 'hit and run'.
last visit was only a few days after joining..
She should know that ATM - we are done helping--end of story. I put some time into a nice PM--my time wasted.
sorry Daisy--- I call them like I see them.
Not even checking in to see the posts!!??? that takes very little effort..
BYE Felicia
Last edited:
