Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

150mW CW Nichia Diode from LSP

Joined
Aug 29, 2007
Messages
750
Points
0
So I put the 150mW blu-ray Diode from LSP to the test.:angel:

Lens: 405nm G-1 glass
Heatsink: 1-1/4" x 3" alumimun
PS: 18V 3A bench
Meter: Knimrod DIY Thermopile calibrated

Here is the results:evil:

mA mW Volt
------------
40 18 4.2
50 33 4.4
60 46 4.5
70 62 4.7
80 77 4.9
90 94 5.0
100 108 5.1
110 125 5.2
120 140 5.3
130 154 5.4
140 155 5.5
150 167 5.5
160 180 5.5
170 195 5.7
180 205 5.7
190 214 5.7
200 225 5.7
210 236 5.8
220 249 5.9
230 258 5.9
240 270 5.9
250 283 5.9
260 292 5.9
270 302 6.0
280 314 6.0
290 323 6.0
300 LEDed:banghead:

I was planning to push it to 300mA.:cryyy:
P6250341.jpg

P6250342.jpg
 
Last edited:





Well that's certainly a bummer, the SF-AW laser I have performs better than that :(
 
Judging from the price, I'd think these diodes would be roughly equivalent to 6X rather than 8X. I would have been surprised to see this running at 300mA.
 
If I remember correctly the 8X are 250mW pulsed and 12X are 320 and 350mW pulsed. The 12X are from Nichia and Sanyo respectively.

Jon
 
thats what I was gonna say...
thats why I was going to throw out the thought that its "safe" current levels seem to line up somewhere between the 4X and the 6X.
 
Hmm... my SF-AW210 does 260mw @ 230ma thru an LSP Lens. So using the awesome 405 lens the 'Nichia 150cw' performs about like my AW210 with the inferior LSP lens. Time to get a 405 G1 lens so I can touch the 300mw range... hahaha
 





Back
Top