Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

1-1.3 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

Re: 1-1.2 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

What a great little kit! It seriously took under 10 min to get running. I highly recommend this kit to folks with sub-par soldering skills like me! +rep
 





Re: 1-1.2 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

boosted_4cyl said:
What a great little kit! It seriously took under 10 min to get running. I highly recommend this kit to folks with sub-par soldering skills like me! +rep
Click to expand...

Thanks!!
 
Re: 1-1.2 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

I have received a few PM inquiries so I wanted to remind LPF members that I am still offering special pricing on the complete Survival Laser parts bundles.

Please see the sales thread here.

Thanks!
 
Last edited:
Re: 1-1.2 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

Could I get one set at 400mA for an lpc815 build?
 
Re: 1-1.2 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

I have an ebay giftcard I have been dying to spend!
 
Re: 1-1.2 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

boosted_4cyl said:
Could I get one set at 400mA for an lpc815 build?
Click to expand...

Do you have the diode for this build? Do you want exactly the same host assembly but with the driver set at 400mA?
 
Re: 1-1.2 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

yes and yes, 400mA should work nicely for both lpc reds and 12x blu-rays
Garoq said:
Do you have the diode for this build? Do you want exactly the same host assembly but with the driver set at 400mA?
Click to expand...
 
Re: 1-1.2 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

boosted_4cyl said:
yes and yes, 400mA should work nicely for both lpc reds and 12x blu-rays
Click to expand...

With the red diode, because the case pin is used as the negative terminal there is a possibility that the circuit could short from the diode to the host and bypass the driver. You would then have a direct drive which would instantly burn out the diode. But because the host is anodized that possibility is reduced. I am also considering including an anodized heat sink with this particular assembly to provide additional electrical isolation.

With a Blu-Ray diode there is no shorting problem, as with the 445nm diodes.
 
Last edited:
Re: 1-1.2 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

boosted_4cyl said:
Could I get one set at 400mA for an lpc815 build?
Click to expand...

The price will be $70 plus shipping and will include an anodized heat sink to help insulate the diode/module from the host body. I will need about 1 week lead time to obtain the custom driver. If you are interested, let me know via PM.
 
Re: 1-1.2 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

Ive actually never built an lpc815 laser before, but I have owned one, and I dont think its an issue. I could be wrong though. Im trying to figure out where the diode would short to get unregulated B+
 
Last edited:
Re: 1-1.2 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

I still have these available, as well as a couple of the "tight pill" host assemblies for $40. Also, I have received a few custom 400mA drivers that I will incorporate into these assemblies soon for red & Blu-Ray builds.
 
Re: 1-1.2 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

Garoq said:
I still have these available, as well as a couple of the "tight pill" host assemblies for $40. Also, I have received a few custom 400mA drivers that I will incorporate into these assemblies soon for red & Blu-Ray builds.
Click to expand...



These are linear drivers right?
Im interested in making a 12x blu ray soon so i might be interested in one of these.
 
Re: 1-1.2 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

mod101 said:
These are linear drivers right?
Im interested in making a 12x blu ray soon so i might be interested in one of these.
Click to expand...

They are "buck" (step-down) drivers based on the AXElite AX2002 regulator chip. They work best on an input voltage of 6-8.4V. I am offering the complete host assembly with anodized heat sink w/set screw, lens cap, Allen wrench and custom modded 400mA driver installed for $70 plus $3 shipping. I have three in stock for Blu-Ray and two for LPC red diodes.
 
Re: 1-1.2 Watt 445nm Host Ass'ys w/Driver and Heat Sink ONLY $50!!

are any more hosts coming in sooner or later?
 
You must log in or register to reply here.


Back
Top