Garoq
0
- Joined
- Aug 27, 2010
- Messages
- 1,525
- Points
- 83
I've created a new value-oriented 445nm Aurora C6 host assembly exclusively for LPF members with all the bells and whistles!
This offer features:
Just add your own 445nm diode and diode module and you will have a really nice laser, not a "bare bones" handheld! Optical output power with a 445nm diode and the supplied lens will be 1-1.4W (or more) depending on diode efficiency. Output with a 405-G-1 lens will be up to 15% higher.
The completed laser uses two Li-ion, LiFePO4 or disposable CR123A batteries. Two 18650 batteries can also be used with our battery extension tube accessory, and a single fully-charged 18650 battery can be used for a reduced power output of 100-300mW.
I've created a photo tutorial of the assembly here.
This is an up to $89.76 value on the Survival Laser website (depending on heat sink material choice), even with the current sale prices ($80.78 if you include the LPF discount). But for a limited time I've set the price of this Deluxe 445nm C6 Aurora Host Assembly for LPF members at only $59.99 each! Domestic shipping is $3, Priority Mail international $22. Please specify your preferred heat sink material during the PayPal checkout process.
Warning: Appropriate laser safety goggles MUST be worn when using the completed laser. Goggles may be purchased here.
Please PM me with any questions.
Thanks for looking!![Wink ;) ;)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
![6391759895_0a7baf0025_b.jpg](http://farm8.staticflickr.com/7150/6391759895_0a7baf0025_b.jpg)
This offer features:
• Survival Laser Aurora C6 host with bezel/retaining ring, heat sink holder, battery compartment, and tested tailcap clicky switch w/wrist strap
• Your choice of natural aluminum, blue anodized aluminum, or copper heat sink with set screw pre-installed
• 1.25A +/- 50mA high-efficiency switching diode driver pre-installed and soldered in pill, tested for proper current output, and with strain relief applied to wires
• 3-element glass lens AR coated for 445nm wavelength
• Blue anodized aluminum extended focusing ring
• Stainless steel external lens spring with ground ends for smooth turning
• Glow-in-the-dark lens cap
• Self-adhesive laser warning label
• Allen wrench for tightening the heat sink set screw
• Your choice of natural aluminum, blue anodized aluminum, or copper heat sink with set screw pre-installed
• 1.25A +/- 50mA high-efficiency switching diode driver pre-installed and soldered in pill, tested for proper current output, and with strain relief applied to wires
• 3-element glass lens AR coated for 445nm wavelength
• Blue anodized aluminum extended focusing ring
• Stainless steel external lens spring with ground ends for smooth turning
• Glow-in-the-dark lens cap
• Self-adhesive laser warning label
• Allen wrench for tightening the heat sink set screw
![6397961395_f1b5f73a83_b.jpg](http://farm8.staticflickr.com/7004/6397961395_f1b5f73a83_b.jpg)
Just add your own 445nm diode and diode module and you will have a really nice laser, not a "bare bones" handheld! Optical output power with a 445nm diode and the supplied lens will be 1-1.4W (or more) depending on diode efficiency. Output with a 405-G-1 lens will be up to 15% higher.
![5926400103_443738da66_b.jpg](http://farm7.staticflickr.com/6146/5926400103_443738da66_b.jpg)
The completed laser uses two Li-ion, LiFePO4 or disposable CR123A batteries. Two 18650 batteries can also be used with our battery extension tube accessory, and a single fully-charged 18650 battery can be used for a reduced power output of 100-300mW.
I've created a photo tutorial of the assembly here.
This is an up to $89.76 value on the Survival Laser website (depending on heat sink material choice), even with the current sale prices ($80.78 if you include the LPF discount). But for a limited time I've set the price of this Deluxe 445nm C6 Aurora Host Assembly for LPF members at only $59.99 each! Domestic shipping is $3, Priority Mail international $22. Please specify your preferred heat sink material during the PayPal checkout process.
Warning: Appropriate laser safety goggles MUST be worn when using the completed laser. Goggles may be purchased here.
Please PM me with any questions.
Thanks for looking!
Last edited: