Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS: TANK007 Complete Build Kit

Joined
Dec 23, 2010
Messages
561
Points
0
well if qumefox includes a tripod like yours (it does right FP?) then i'd be all over it. The tank007 host looks so badass and even better with a tripod. Hey FP since you offer this does this mean you have Flex's in stock? Lava has been out of those for like over a month. Impossible to get you hands on a flex and who knows when the next batch is going to be available. I'd buy a couple off you if you did!;)
 





Joined
May 4, 2009
Messages
5,443
Points
113
I have plenty of drivers give me a PM...


well if qumefox includes a tripod like yours (it does right FP?) then i'd be all over it. The tank007 host looks so badass and even better with a tripod. Hey FP since you offer this does this mean you have Flex's in stock? Lava has been out of those for like over a month. Impossible to get you hands on a flex and who knows when the next batch is going to be available. I'd buy a couple off you if you did!;)
 
Joined
May 2, 2011
Messages
10
Points
0
looks very nice. i like the idea of the tripod. what is the highest power module you can offer in your kit?
can you offer 1000mW blue?
thanks
Jan
 
Joined
May 4, 2009
Messages
5,443
Points
113
Yes you can make this a 1000mW blue if you like, the copper heatsink is able to dissapate that amount of power very easy ;)



looks very nice. i like the idea of the tripod. what is the highest power module you can offer in your kit?
can you offer 1000mW blue?
thanks
Jan
 

Mute

0
Joined
Jun 5, 2011
Messages
15
Points
0
Alright, so all I basically need is a soldering iron, a diode, and some wire? Also what driver would be better? What current on either of the drives be good for handling a 445nm 1.5-2W diode? Thanks :]
 
Joined
May 4, 2009
Messages
5,443
Points
113
The current you set the driver to will depend on the power out you want to get from your diode. remember all diodes are not the same, some are more efficient than others and can take more power.
if you need more help please PM me I will be glad to help you.



Alright, so all I basically need is a soldering iron, a diode, and some wire? Also what driver would be better? What current on either of the drives be good for handling a 445nm 1.5-2W diode? Thanks :]
 

Swagga

0
Joined
Sep 17, 2009
Messages
4
Points
0
Hi FP,

This kit looks excellent! Three questions for you, sir.
1. Are you still selling these kits?
2. Are you able to supply it fully assembled, preferably with a higher powered diode (like someone else mentioned, maybe a 1W diode)?
3. Are you able to post to the UK?

I'll explain briefly, I'm in Afghanistan at the moment and I really hate the flies here, I'm hoping that this could be just the thing to keep them at bay. Responsibly, of course :)

TIA
 
Joined
May 4, 2009
Messages
5,443
Points
113
PM sent...


Hi FP,

This kit looks excellent! Three questions for you, sir.
1. Are you still selling these kits?
2. Are you able to supply it fully assembled, preferably with a higher powered diode (like someone else mentioned, maybe a 1W diode)?
3. Are you able to post to the UK?

I'll explain briefly, I'm in Afghanistan at the moment and I really hate the flies here, I'm hoping that this could be just the thing to keep them at bay. Responsibly, of course :)

TIA
 
Joined
Apr 30, 2012
Messages
59
Points
8
Hi FP,

Can this host handle the new 9mm 445 diodes at 3W+ using your copper sink? Is the barrel long enough to house the required battery configuration and you have drivers in stock that would handle the power load?

Thanks.

Z
 

Laik

0
Joined
Jan 22, 2013
Messages
946
Points
28
Please read the date on this thread, Zircarg. Let's not post on anymore dead threads, ok?
 
Joined
May 4, 2009
Messages
5,443
Points
113
You guys have not been around long enough to be giving advice if you think this is a dead thread just because of the last post date, this is a BST thread an anyone
can post in it at any time and say what ever they want, that's the way MY threads work but thank you for watching and protecting this thread though :bowdown:


bringing back OLD and dead thread..................

I'll second that

Please read the date on this thread, Zircarg. Let's not post on anymore dead threads, ok?


@ Zircarg This would be a rather small host for that power I do have some other nice host's what you may like that will
work with the power you desire so please PM me and I'll show you some nice hosts.

To keep it small and reduce heat you will want a set up with dual drivers something like this>
 
Last edited:
Joined
Feb 21, 2013
Messages
5,013
Points
0
only reason i said something was since the last post was roughly 1.5 years old so didnt want someone to get their hopes up and then you come back and say you no longer have these hosts. personally id be surprised if you still had some but who knows, ive been surprised before so there is no telling
 




Top