Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



FS: TANK007 Complete Build Kit

Flaminpyro

Well-known member
Joined
May 4, 2009
Messages
5,461
Points
113
This is a great host for the BRD-205 or any 8X or 12X diode and the new 445 diode.
This is a very cool host with a tripod socket and a SIDE clickie not an end clicky which makes for very easy operation. it runs on a single 18650 cell for a long time between charges. what you see in the picture is what I'm quoating here as a kit. this can vary if you would like something different. aluminum heatsink, heatsink for green laser module, laser diodes, all will make the price vary.
So what's in the kit, a TANK007 host, a heavy Copper heatsink custom machined for the tighest fit in the host, a machined Aixiz module that fits the heatsink like a glove, a Dr. Lava V5 flex drive or micro boost drive, a + battery terminal, all this for $92.00 + shipping and 3% paypal fees, again prices can vary with different options, this kit is avab in a semi-completed form, and with the driver set.
Enjoy and thanks for looking !

a beam shot @ 159mW with acrillic lens

machining the copper heatsink from solid copper bar

almost finished heatsink

Check out this link> http://laserpointerforums.com/f39/flaminpyros-stuf-67118.html#post966672
 
Last edited:



bryce007

New member
Joined
Jul 1, 2009
Messages
1,679
Points
0
Very nice. Looks like some great heatsinking.
 
Last edited:

Hemlock_Mike

Well-known member
Joined
Jan 7, 2007
Messages
6,284
Points
83
AND machining soft metal like copper isn't easy. Try it sometime.

Nice work -- Mike
 

Prototype

New member
Joined
Jun 19, 2009
Messages
2,712
Points
0

Flaminpyro

Well-known member
Joined
May 4, 2009
Messages
5,461
Points
113
No threadjack involved, that is what this thread is about ! that looks like a nice host, I hope so as I have some of these on order to offer with there big brother as complete kits or completed builds, I beleve I could produce that heatsink in Cu for you @ $30.00 ea how many would you like ? LOL that is a realy bomb price and will prob go up in the furture. I'm currently selling Cu heatsinks at fire sale prices to get my work known so get in on the rock bottom Cu HS prices while you can......................

BR Pyro... :eg:


So I've heard

@Flaminpyro

sorry for the threadjack, but how much would a heatsink for this TANK007 cost? (Aluminum and/or copper prices if you don't mind)

DealExtreme: $10.87 TANK007 TK-703 HA-III Cree Q3-WC 110-Lumen LED Flashlight - Black (1*AAA/1*10440)

Good luck with the sale. And that beamshot looks really blue.
 

Flaminpyro

Well-known member
Joined
May 4, 2009
Messages
5,461
Points
113
Sorry to take so long I somehow missed this one till now or did I reply, it's been crazy around here, just the way I like it !!!!!!!
for the copper heatsink it's $30.00 for a Aluminum it's $25.00 and either one is machined to fit each and every host and in most cases a heatsink from one host will not fit in an other, that is how tight I make the fit, that extra attention to detail helps let the heat out better !!!! besides I don't like the sound of a heatsink rattling around inside my host LOL :crackup: and I have some examples here of heatsinks made by other people (who will remain nameless, don't ask) and sold here to prove it happens.
so you have a fine day ! Pyro...

EDIT; my bad, just seen I did reply #6 it was so far back I didn't see it LOL but did not quote the aluminum HS so now you have that.

So I've heard

@Flaminpyro

sorry for the threadjack, but how much would a heatsink for this TANK007 cost? (Aluminum and/or copper prices if you don't mind)

DealExtreme: $10.87 TANK007 TK-703 HA-III Cree Q3-WC 110-Lumen LED Flashlight - Black (1*AAA/1*10440)

Good luck with the sale. And that beamshot looks really blue.
 
Last edited:

o0ICE0o

New member
Joined
Jul 26, 2009
Messages
340
Points
0
^^^^
THAT is a threadjack.

/Spam...

NICE kit, btw.
If I had money, I would buy one.
 

HIMNL9

New member
Joined
May 26, 2009
Messages
5,416
Points
0
glad to help :D
..... are you trying to increase your post count ? :whistle: (LOL :D)


Seriously speaking, do you have enough time for make a custom design heatsink from aluminium, and how much can it cost to ship it to Italy ?

I don't ask you how much it can cost in work, cause you still haven't seen the draws, but, if you can give at least an indicative idea, it have a direct side for diode (no aixiz module), a terminal ring for focusing, fins, and probably the finned part need to be made in 2 pieces, screwed together, cause the diode side remain 30 to 40 mm inside the back part of it (still refining the draws, so don't have a definitive quoted one), and don't know if you can made it so much inside.

Also just an approximative idea can be ok, i'm trying to figure how much it can end.
 

Flaminpyro

Well-known member
Joined
May 4, 2009
Messages
5,461
Points
113
Yes I make custom heatsinks to your spec's and I would have to check the shipping charges to Italy. if you would like to PM me your town name I will find out the shipping charges and if you supply me with some kind of drawing I can give you a quote on your heatsink. thanks for your inquire ! Pyro...



..... are you trying to increase your post count ? :whistle: (LOL :D)


Seriously speaking, do you have enough time for make a custom design heatsink from aluminium, and how much can it cost to ship it to Italy ?

I don't ask you how much it can cost in work, cause you still haven't seen the draws, but, if you can give at least an indicative idea, it have a direct side for diode (no aixiz module), a terminal ring for focusing, fins, and probably the finned part need to be made in 2 pieces, screwed together, cause the diode side remain 30 to 40 mm inside the back part of it (still refining the draws, so don't have a definitive quoted one), and don't know if you can made it so much inside.

Also just an approximative idea can be ok, i'm trying to figure how much it can end.
 




Top