Garoq
0
- Joined
- Aug 27, 2010
- Messages
- 1,525
- Points
- 83
I have started a new business called Survival Laser, Inc. Survival Laser is selling 1.1W 445nm focusable laser parts bundles, laser parts and laser accessories. We have a webstore operational at www.survivallaser.com.
Right now there are two variations of the laser parts bundle, one with rechargeable batteries and a charger, and one with disposable batteries and no charger. The rechargeable package includes the 1,100 mW 445nm laser parts bundle, a lens cap, 2 rechargeable RCR123A batteries, a battery charger, a pair of laser safety goggles, a holster and complete illustrated instructions and safety precautions. The heat sink is aluminum and is blue anodized. The Survival Laser logo and other information is laser etched onto the sides of the host. Both bundles include all parts necessary to construct and operate the laser safely and can be assembled in 5-10 minutes with no soldering or special mechanical skills required. The only tool necessary is an Allen wrench which is included with the package. You can preview the parts bundle instructions and a number of other documents including recommended safety precautions on the Survival Laser home page.
The diode modules and driver assemblies are 100% tested and will output 1,100mW +/- 100mW with fully charged batteries. Recommended duty cycle is 1 minute on, 1 minute off.
On the "Laser Parts" page is a complete host assembly for 1-1.2 watt 445nm handheld lasers. It includes an Aurora C6 laser body (retaining ring, heat sink holder, battery holder and tailcap switch), a 1.25A diode driver soldered and preinstalled in the "pill", an unanodized aluminum heat sink with set screw, a 0.050" Allen wrench and a lens cap. The battery holder will be either generic or not laser etched. The customer will add their own 445nm diode, AixiZ diode module and 445nm glass lens. The completed laser uses two rechargeable RCR123A or disposable CR123A batteries. Each assembly is tested with the recommended batteries, lens and diode before shipment. Laser output with an A130 or A140 diode and 445nm AR coated glass lens will be 1,100mW +/- 100mW. The driver circuit is a current regulated buck driver which consistently outputs 1.20-1.25A. They are listed for $56 on the Survival Laser website but I also offer special pricing to LPF members. A customer should be able to produce a complete 1.1 watt 445nm laser for around $110 using this assembly.
On the "Laser Accessories" page we offer 445nm laser safety goggles, rechargeable and disposable batteries, a charger and a holster.
We also have a Facebook page at www.facebook.com/pages/Survival-Laser/174943532519164. A customer recently posted a nice review of the Survival Laser parts bundle on the Discussion Board.
We plan to run specials from time to time for LPF members as we are currently doing with the 445nm laser host assembly.
All products are currently in stock. Shipment via First Class or Priority Mail is normally within 24 hours or the next business day.
The Survival Laser email address is sales at survivallaser dot com.
Please let me know if there are any other products you would like to see offered or if you have any suggestions, comments or questions. I look forward to serving you!
Gary
Right now there are two variations of the laser parts bundle, one with rechargeable batteries and a charger, and one with disposable batteries and no charger. The rechargeable package includes the 1,100 mW 445nm laser parts bundle, a lens cap, 2 rechargeable RCR123A batteries, a battery charger, a pair of laser safety goggles, a holster and complete illustrated instructions and safety precautions. The heat sink is aluminum and is blue anodized. The Survival Laser logo and other information is laser etched onto the sides of the host. Both bundles include all parts necessary to construct and operate the laser safely and can be assembled in 5-10 minutes with no soldering or special mechanical skills required. The only tool necessary is an Allen wrench which is included with the package. You can preview the parts bundle instructions and a number of other documents including recommended safety precautions on the Survival Laser home page.
The diode modules and driver assemblies are 100% tested and will output 1,100mW +/- 100mW with fully charged batteries. Recommended duty cycle is 1 minute on, 1 minute off.
On the "Laser Parts" page is a complete host assembly for 1-1.2 watt 445nm handheld lasers. It includes an Aurora C6 laser body (retaining ring, heat sink holder, battery holder and tailcap switch), a 1.25A diode driver soldered and preinstalled in the "pill", an unanodized aluminum heat sink with set screw, a 0.050" Allen wrench and a lens cap. The battery holder will be either generic or not laser etched. The customer will add their own 445nm diode, AixiZ diode module and 445nm glass lens. The completed laser uses two rechargeable RCR123A or disposable CR123A batteries. Each assembly is tested with the recommended batteries, lens and diode before shipment. Laser output with an A130 or A140 diode and 445nm AR coated glass lens will be 1,100mW +/- 100mW. The driver circuit is a current regulated buck driver which consistently outputs 1.20-1.25A. They are listed for $56 on the Survival Laser website but I also offer special pricing to LPF members. A customer should be able to produce a complete 1.1 watt 445nm laser for around $110 using this assembly.
On the "Laser Accessories" page we offer 445nm laser safety goggles, rechargeable and disposable batteries, a charger and a holster.
We also have a Facebook page at www.facebook.com/pages/Survival-Laser/174943532519164. A customer recently posted a nice review of the Survival Laser parts bundle on the Discussion Board.
We plan to run specials from time to time for LPF members as we are currently doing with the 445nm laser host assembly.
All products are currently in stock. Shipment via First Class or Priority Mail is normally within 24 hours or the next business day.
The Survival Laser email address is sales at survivallaser dot com.
Please let me know if there are any other products you would like to see offered or if you have any suggestions, comments or questions. I look forward to serving you!
Gary
Last edited: