Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Sale thread/ Hosts/Heat Sinks/Focus adapters/lasers






Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi, Maybe that would be 26650 ,but with the build he has it could be 18650's. I dont think I ever seen 26350's even if there was it would do him any good with the S2+ Convoy.
Rich:)
 
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi Red
That’s new to me thanks for clarifying that
I guess he was correct about them
Do you think they would work being that they at 350mm long that would mean longer fun time between charges if so that would be great for a NDG7475 or 03 build with a copper sink
Rich:)
 
Joined
May 4, 2018
Messages
68
Points
18
Where do you buy your 26350 cells ?
I usually buy EFest and AW as I like to buy good quality cells, 26350 I am only finding no name Chinese such as these.
Unfortunately there aren't many choices for 26350. I buy most of my batteries in general from mtnelectronics as you linked as they are a trustworthy seller. I haven't used the 26350 in any lasers but I use them for flashlights with no issues so They should be fine for some lasers.

There are Imalent 26350 batteries available now also that are probably a better choice for higher drain.
 
Last edited:
Joined
May 4, 2018
Messages
68
Points
18
Hi Red
That’s new to me thanks for clarifying that
I guess he was correct about them
Do you think they would work being that they at 350mm long that would mean longer fun time between charges if so that would be great for a NDG7475 or 03 build with a copper sink
Rich:)
That's why I was asking if 2 will fit in the s11 as they're 2000mAh vs 700 mAh for the 18350.
 

GSS

0
Joined
Apr 28, 2015
Messages
5,053
Points
113
We were talking about using 2 x 26350 in the convoy S11 such as these. :)
They are also for sale at ebay but I have not bought any yet so I don't know if there any good or not.

Yup, they are not listed with a crazy mAh rating which is always a good sign.
2000 mAh seems legit but not sure of the I think 6A discharge rate? is that bad?
 
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi,
I just ordered 2 of them to try out, The 18350' are 18mm in diameter X 350mm in length . So the 26350's should fit fine in the S11 .
1X26650 or 2x26350's . I think I might build a 520nm in the S11 with a copper sink, have some 520nm diodes coming rated for 500 to 700 mW's
Rich:)
 
Joined
Jul 10, 2015
Messages
9,799
Points
113
Yes also found these that look good. Could use 3 in series for bigger builds and keep the host shorter.
I had seen the plain 26350 before on ebay but because there was only the one brand I didn't follow up but these appear to be high drain and could be useful.
 
Last edited:
Joined
Dec 15, 2014
Messages
6,775
Points
113
Yes also found these that look good. Could use 3 in series for bigger builds and keep the host shorter.
I had seen the plain 26350 before on ebay but because there was only the one brand I didn't follow up but these appear to be high drain and could be useful.

Red, I just purchased 2 from a place here in the states in Vancouver , they should be great in an M11 host for a higher power 520 copper sink.
Rich:)
 
Joined
Jul 10, 2015
Messages
9,799
Points
113
Looking at those imalent wrapped cells at the bottom it says 26 x 39mm which could mean it has a protection board, will find out.
 
Joined
Dec 15, 2014
Messages
6,775
Points
113
Looking at those imalent wrapped cells at the bottom it says 26 x 39mm which could mean it has a protection board, will find out.

Great thanks didn't see that let me know, I just checked why they are 39mm might be because of the internal protection board inside the battery. Thats the only thing I can think of. even if they are a tat longer I can still use a shorter spring the make up the space.
So that shouldn't be an issue hopefully.
Rich:)
 
Last edited:
Joined
May 4, 2018
Messages
68
Points
18
Yup, they are not listed with a crazy mAh rating which is always a good sign.
2000 mAh seems legit but not sure of the I think 6A discharge rate? is that bad?
It really depends on what you're using it for. If you're using it for vaping it will probably blow up. If you're using it for a laser or flashlight drawing less than 4A it's fine.
 
Joined
Dec 15, 2014
Messages
6,775
Points
113
HI,
Bump on these builds, Thank You
Rich:)
 

Attachments

  • FC20E7F1-C45D-4B52-8CD3-74D9275C3DE6_1_105_c.jpeg
    FC20E7F1-C45D-4B52-8CD3-74D9275C3DE6_1_105_c.jpeg
    130.6 KB · Views: 28
  • 45F05650-00EC-4110-8CB1-D02B920EBCDB_1_105_c.jpeg
    45F05650-00EC-4110-8CB1-D02B920EBCDB_1_105_c.jpeg
    104.3 KB · Views: 31
  • CE77F4B1-0DE7-433B-869E-AFFA20CE870A_1_105_c.jpeg
    CE77F4B1-0DE7-433B-869E-AFFA20CE870A_1_105_c.jpeg
    107.1 KB · Views: 29
  • DDE0BA6A-39EA-4474-AA0F-15B0872EC85D_1_201_a.jpeg
    DDE0BA6A-39EA-4474-AA0F-15B0872EC85D_1_201_a.jpeg
    196.3 KB · Views: 25
  • E0ED5EDD-62EF-4572-A17A-76205609CB51_1_201_a.jpeg
    E0ED5EDD-62EF-4572-A17A-76205609CB51_1_201_a.jpeg
    185.6 KB · Views: 37




Top