Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

My Tiny Green Giant (505nm) Copper Build with Beam Shot

Joined
Apr 6, 2014
Messages
2,436
Points
113
Thought I'd document the 'follow-on' build of the first of my varnished copper 510 hosts.
This one's got the new 35mW Sharp 505nm module from DTR.

First all the parts ready to assemble.

IMG_4721.JPG


The set screw (on top) for the negative wire to case.
I drilled a side hole (as Jeff, Bowtie) suggested in one of his build threads.
This makes it easier to ground the negative to the body.

IMG_4723.JPG


and screw down firmly.

IMG_4725.JPG


Applying a liberal amount of Nano Diamond Thermal Compound to the module.
Note the clear tape around the G2 lens to protect it from the compound and to make it easy to handle.

IMG_4727.JPG


All ready now to pinch the positive wire into place using the centre pin of the adaptor.
Next time I'll try soldering it onto the pin before pushing it into place like Jeff does.

IMG_4729.JPG


and now fully assembled and the copper focus ring put in place around the lens securely.

IMG_4730.JPG


Bingo, whack on the battery vape with one 18650 Nitecore and she's-a-blaz'n....

35000µW of 505nm goodness !!
Like I said, my Tiny Green Giant :crackup:

IMG_4731.jpg


Hope you enjoy.

RB

:yh:
 
Last edited:





BowtieGuy

0
LPF Site Supporter
Joined
Oct 14, 2012
Messages
6,090
Points
113
Congrats, RB, that's a classy looking copper build you've got there, I love it! :beer:
35000µW of 505nm, how do you contain all that raw power? :crackup:
:gj:
 
Last edited:

BobMc

0
Joined
Apr 23, 2016
Messages
3,685
Points
113
Man that is really sharp looking host! Well done, nice little green guy you've got there. :gj:
 
Joined
Sep 20, 2013
Messages
17,253
Points
113
Great photos, Andrew. So you stuck to the suggested power output of 35 mW? Did you measure it or are you guessing? How long was your exposure to get that beam shot? Thanks for sharing it here. :D
 
Joined
Sep 20, 2013
Messages
17,253
Points
113
Just curious, but couldn't you ground the module/host by attaching to the case pin on the diode? It's just sitting they serving no purpose at all while everyone is using all manner of grounding methods. Maybe I'm missing something here.
 
Joined
Apr 6, 2014
Messages
2,436
Points
113
Congrats, RB, ...
35000µW of 505nm, how do you contain all that raw power?
hehehe, it's hard I tell yah !!! :crackup:
Man that is really sharp looking host! Well done, nice little green guy you've got there.
Cheers Bob

Nice assembly photos---great looking copper host!
Thank you so much !

Great photos, Andrew. So you stuck to the suggested power output of 35 mW? Did you measure it or are you guessing? How long was your exposure to get that beam shot? Thanks for sharing it here.
Cheers Paul.
Yeh just bought the stock module from Jordan straight off the site.
Didn't ask for any mods on the driver so I'm guessing it's 35mW and 505nm.
I'll pull out one of my LaserBee LPMs and test it but I can't spetro it as I don't have a S.Scope.
The photo was a single 30 sec exposure on my iPhone.

Not much of a beam shot though........
True, I agree, this was basically just to show the WL and nice beam size.
I did do a teaser shot the other night but maybe you missed it, see link below just for fun.
http://laserpointerforums.com/f48/post-your-random-pics-73077.html#post1489493

My address sent via PM, thanks!
I might take you up on that. :shhh:
Oooooo, nice :)

We do need more beamz however, not enough!

-Alex
I will Alex, promise, just as soon as I get a chance.
Too many 'irons' in the fire at the moment. :crackup:
What is the shape of the beam spot?
Steve, with a G2 lens I get the dreaded square artefact on the side but with a nice tight spot.
I'll take a shot to show you later.

Just curious, but couldn't you ground the module/host by attaching to the case pin on the diode? It's just sitting they serving no purpose at all while everyone is using all manner of grounding methods. Maybe I'm missing something here.
Probably Paul but I haven't mucked around with that yet, never opened the module case to see.

:beer:
 
Joined
Jun 3, 2007
Messages
2,560
Points
113
Steve, with a G2 lens I get the dreaded square artefact on the side but with a nice tight spot.
I'll take a shot to show you later.


:

That could be solved I believe by using a lens with a wider diameter. P.S. I'm always puzzled why the first of lens choice begins with the letter G. There are many companies that make this type of lens which I think is an aspheric known commercially as a Best Form lens. Try a wide diameter short focal length plano-convex lens as an alternative.
 
Last edited:
Joined
Apr 6, 2014
Messages
2,436
Points
113
That vould be solved I believe by using a lens with a wider diameter. P.S. I'm always puzzled by first lens choice begins with the letter G. There are many companies that make this type of lens which I think is an aspheric known commercially as a Best Form lens. Try a wide diameter short focal length plano-convex lens as an alternative.

A bit out of my depth Steve.
Could you link to something you'd recommend, still a noob I'm afraid mate.

:beer:
 
Joined
Sep 20, 2013
Messages
17,253
Points
113
I wonder if the reason I don't have it when using an acrylic lens is because they aren't AR coated at all. I think Zack (Zraffleticket) said he got it a little with his acrylic lens, but I don't see any at all with mine.
 
Joined
Feb 4, 2010
Messages
3,278
Points
113
A set screw to get the negative lead on the host.... That's a pretty good idea. Like the build :beer:
 
Last edited:




Top