Too bad you didn't come here for advice first.
You are 100% right, as other have said.
Don't take can't return it for an answer.
That guy has been around for a while --he was an active member for a while attempting to market his business and lasers here. He stopped posting here after he found that nobody was buying his overprice laser selling daydreams.
Those lasers typical sell at retail prices of $60 to $95.
The guy//his business/his web site is reselling from within the USA hand held lasers with >5mW output to customers within USA. I could be wrong but it seems what he is doing is in violation of US laws, rules, and regulations, probably in several ways.
If so that would be a "Prohibited Activity" under PalPal's Acceptable Use Policy here: https://www.paypal.com/us/webapps/mpp/ua/acceptableuse-full?locale.x=en_US
See for yourself below the most current statements by the US FDA reflecting US laws, rules, and regualtions are as follows:
"FDA regulates all laser products, even handheld, battery-powered lasers that are available for purchase FROM manufacturers, importers, assemblers, dealers or distributors in the United States and its territories. This includes lasers manufactured or obtained on a continuing basis for the purpose of sale or resale.
FDA requires that manufacturers of these lasers limit the power of the laser light to 5 milliWatts (often abbreviated as "mW") or less. The labeling or packaging must allow the purchaser to know the power of the laser, its hazard class, and its wavelength before the laser is purchased. Even online advertisements must display this information for the purchaser.
Even the smallest handheld, battery-powered lasers are capable of emitting laser light at hazardous powers. Larger models, the size of a small flashlight, can burn skin and pop balloons. More importantly, consumers should assume any size handheld battery-powered laser they do not directly control has the potential to blind or permanently affect eyesight.
One way to determine if such a laser has been manufactured to regulatory power and hazard class limits is to find labeling. The labeling that comes with the laser (and online labeling) must display the power, hazard class, and wavelength. The wavelength is a number that describes the color of the beam.
The label must display the laser power. It must be 5 milliWatts or less. The label must display the hazard class. It must be Class I, Class IIa, Class II, Class IIIa or Class 1, Class 2 or Class 3R."
"REMEMBER:
Do not purchase a handheld, battery-powered laser labeled with hazard Class IIIb, Class IV, Class 1M, Class 2M, Class 3B or Class 4 unless the manufacturer has an approval from FDA (called a "variance") to allow the purchase. Lasers approved for purchase in these classes often have very specific uses and may be sold under certain conditions known to the manufacturer. Sales without a variance, or sales that violate the conditions of the variance, ARE ILLEGAL"
From 6/29/2016 update FDA web site here: Does FDA regulate these new powerful laser "pointers" and are they hazardous?
Additional explaination from FDA as follows:
"Laser pointers are hand-held lasers that are promoted for pointing out objects or locations. Such laser products can meet one of two definitions for laser products. The first is for “surveying, leveling, and alignment laser products” as defined by Title 21 of the Code of Federal Regulations (CFR) Section 1040.10(b)(39):
“Surveying, leveling, or alignment laser product means a laser product manufactured, designed, intended or promoted for one or more of the following uses:
(i) Determining and delineating the form, extent, or position of a point, body, or area by taking angular measurement.
(ii) Positioning or adjusting parts in proper relation to one another.
(iii) Defining a plane, level, elevation, or straight line.”
Hand-held lasers promoted for entertainment purposes or amusement also meet the second definition, that of “demonstration laser products” as defined by 21 CFR 1040.10(b)(13):
“Demonstration laser product means a laser product manufactured, designed, intended, or promoted for purposes of demonstration, entertainment, advertising display, or artistic composition.”
"Laser products promoted for pointing and demonstration purposes are limited to hazard Class IIIa by FDA regulation.
21 CFR 1040.11(b) and 1040.11(c), limit surveying, leveling, and alignment, and demonstration laser products to Class IIIa. This means that pointers are limited to 5 milliwatts output power in the visible wavelength range from 400 to 710 nanometers. There are also limits for any invisible wavelengths and for short pulses. Pointers may not exceed the accessible emission limits of CDRH Class IIIa or IEC1 Class 3R."
From FDA website last updated 3/12/2015 here: http://www.fda.gov/Radiation-Emittin.../ucm116373.htm
Last edited:
