Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Opening laser shop

marianin

marianin

0
Joined
Mar 29, 2012
Messages
173
Points
0
Hi all LPF members.

Iam opening a little laser shop in México and the original idea was use mohgasm round drivers but these drivers are no more long a available and i dont buy blank driver boards or other good and cheap linear drivers, i want to know if someone has blank boards or the drivers assembled, and i want to know if someone wants to help me in my little project. this is the page (is in spanish) Laser Azul, Violeta, Verde, Rojo Excelentes Precios - $ 500.00 en MercadoLibre

thanks :wave:
 





May I recommend the BlitzBuck V2 from CajunLasers? They are my own drivers, and they are much more efficient than Mohgasm driver ^_^

/shameless plug.
 
fine man ;) you can give me a disscount??? i will order a lot in the next weeks, but you only have in .97, 1.17 and 1.7 no???

Wolfman29 said:
May I recommend the BlitzBuck V2 from CajunLasers? They are my own drivers, and they are much more efficient than Mohgasm driver ^_^

/shameless plug.
Click to expand...
 
Yup - only those current levels. However, all should be safe for 445nm diodes.

And I don't run the store. But Clif may be interested in arranging something with you if buy a larger number. Also - you can use the 10% discount code on his site.
 
If you need boost drivers I've got a 9mm x 12mm one in production ;) but for now go with wolfman's driver as mine are in production. :D
Heres my site with videos and info on mine ;)
AtMa-BoostDriver
 
Last edited:
The BlitzBucks don't like running low Vf diodes, as far as I know. Anyway, why use two boost drivers when you could use one buck driver that is more efficient and cheaper than two of the boost drivers? ;)

Also, yours looks rectangular - like it wouldn't fit in an Aixiz module?

Note that I'm not trying to bash you in any way!
 
Wolfman29 said:
The BlitzBucks don't like running low Vf diodes, as far as I know. Anyway, why use two boost drivers when you could use one buck driver that is more efficient and cheaper than two of the boost drivers? ;)

Also, yours looks rectangular - like it wouldn't fit in an Aixiz module?

Note that I'm not trying to bash you in any way!
Click to expand...

Yes wolfman is correct in saying his is more efficient ;)
The one in the pictures and videos is slightly larger then my production run version ;)
Don't worry bud no offense taken :beer: (I'm not the type to start drama over drivers, they both have their pros and cons)
 
Yup. Obviously, if you want to use one battery, go with the booster. :beer:
 
marianin said:
wow nice drivers, how do you set the current??? by pot or by resistors
Click to expand...

They are set via resistors, which I set for you :beer:


Wolfman29 said:
Yup. Obviously, if you want to use one battery, go with the booster. :beer:
Click to expand...
Yup :) these can drive the future 515nm using 1 battery as well :)
And of course yours is at least 10-15% more efficient I beleive :) so with the boost the batteries will drain faster and with the buck they'll last longer :D and these two are the same size as flexdrives :eg: so both of them fit in a bunch of places ;)
 
Last edited:
It's not PF445, it's PL10 or PF10... can't remember which one.

But I KNOW it's not PF445. :)
 
You must log in or register to reply here.


Back
Top