FS: Sanwu Laser store - RGB handheld lasers, 405nm,445nm,465nm,470nm,505nm,515nm,520nm,525nm,635nm,650nm

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Found a website that sells overpriced Sanwu lasers, you guys might already know, but I just felt like sharing.
https://www.kitlaser.com/3000mw-465nm-laser-pointer-single-multi-mode.html

They even claim that its their brand.

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Ultracrepidarian said:

Found a website that sells overpriced Sanwu lasers, you guys might already know, but I just felt like sharing.
https://www.kitlaser.com/3000mw-465nm-laser-pointer-single-multi-mode.html

They even claim that its their brand.

Click to expand...

Jeez, another! Lol

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Its a different world over in Asia, and what rights companies have and can utilize. I like this quote from their about us section; quote; "You can buy quality products and enjoy god's service "
:crackup:
J

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

jnrpop said:

Its a different world over in Asia, and what rights companies have and can utilize. I like this quote from their about us section; quote; "You can buy quality products and enjoy god's service "
:crackup:
J

Click to expand...

How is your pocket at the Customs? Any news?

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Gods service. Oh dear.

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

No news yet, usually i get a document in the mail with-in two business days. Tracking shows "the shipment is in preparation for customs clearance", i guess their doing the standard checks. Will post back when tracking updates :beer:

O and Nexgen, how is your 493 pocket doing 120mw, is it a custom? PM me

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

jnrpop said:

No news yet, usually i get a document in the mail with-in two business days. Tracking shows "the shipment is in preparation for customs clearance", i guess their doing the standard checks. Will post back when tracking updates :beer:

O and Nexgen, how is your 493 pocket doing 120mw, is it a custom? PM me

Click to expand...

PM sent :beer:

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

My Pocket 488 just arrived in Jersey City. I should have it Monday or Tuesday

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Good luck with your new 488nm laser, Bruce. + Rep.

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Hi All:

My Sanwu 488 nm G7 Pocket Laser arrived late Thursday, and I’d like to make it the subject of my first LPF review. I apologize for the less than stellar photo quality. I used my iPhone 5S camera, as I had trouble setting up my Canon T3/1100B. They're not the best image quality, but the color is pretty accurate. I'm sure the next review will have the HD imaging that this laser deserves.

It arrived sealed in a Static Shielding Bag which was packaged inside two additional padded shipping bags. The host was pristine and, like all Sanwu Pocket Lasers, is made from virtually seamless stainless steel. The laser’s recorded wavelength, as measured by Sanwu, is 488 nm.

Freshly charged EBL 10440 3.7 V 350 mAh Li-ion batteries were used for all tests and measurements.

The beam is bright with tight collimation, and the spot is a clean circle. Its color is gorgeous sky blue, without any trace of green. It is clearly visible indoors, even with the interior lighting on.

Optical Power was measured by a Lasersbee AX3 LPM over 45 second periods in order to remain within the laser’s recommended duty cycle. Peak Power measurements averaged 47 mW using the factory installed G7 lens that I requested. The laser felt a little warm at the end of each 45 second period, but never hot to the touch.

Overall I’m impressed with this very nice addition to Sanwu’s Pocket Laser series. As many of you have already stated, this WL is particularly beautiful and unique, and I’m very happy to add it to my laser collection. Thank you for your time and interest. Please Be Well and Take Care.

-cd



Sanwu 488nm G7 Pocket Laser Uwrapped



Beam Shot Toward Laser



Beam Shot From Laser

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

cyberdoc said:

Hi All:

My Sanwu 488 nm G7 Pocket Laser arrived late Thursday, and I’d like to make it the subject of my first LPF review. I apologize for the less than stellar photo quality. I used my iPhone 5S camera, as I had trouble setting up my Canon T3/1100B. They're not the best image quality, but the color is pretty accurate. I'm sure the next review will have the HD imaging that this laser deserves.

It arrived sealed in a Static Shielding Bag which was packaged inside two additional padded shipping bags. The host was pristine and, like all Sanwu Pocket Lasers, is made from virtually seamless stainless steel. The laser’s recorded wavelength, as measured by Sanwu, is 488 nm.

Freshly charged EBL 10440 3.7 V 350 mAh Li-ion batteries were used for all tests and measurements.

The beam is bright with tight collimation, and the spot is a clean circle. Its color is gorgeous sky blue, without any trace of green. It is clearly visible indoors, even with the interior lighting on.

Optical Power was measured by a Lasersbee AX3 LPM over 45 second periods in order to remain within the laser’s recommended duty cycle. Peak Power measurements averaged 47 mW using the factory installed G7 lens that I requested. The laser felt a little warm at the end of each 45 second period, but never hot to the touch.

Overall I’m impressed with this very nice addition to Sanwu’s Pocket Laser series. As many of you have already stated, this WL is particularly beautiful and unique, and I’m very happy to add it to my laser collection. Thank you for your time and interest. Please Be Well and Take Care.

-cd



Sanwu 488nm G7 Pocket Laser Uwrapped

Beam Shot Toward Laser

Beam Shot From Laser

Click to expand...

Looks great! You might want to make a thread in the review section on it, since it’s a newer diode.

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Thanks for the review, +rep.

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

That was a very good first review, cyberdoc. Remember that the host is made out of steel, which has very poor thermal conductivity. If it feels warm on the outside, you can bet it is hot inside. I can only imagine what is used to heat sink the diode, but whatever it is, it can't be much mass. These diodes tend to run hot because the forward voltage is high. At 47 mW it is likely being driven ~150 mA. Keep this in mind as I wouldn't want you to lose the diode to running too long. :thanks: + Rep.

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Gazen said:

Looks great! You might want to make a thread in the review section on it, since it’s a newer diode.

Click to expand...

Thanks for the kind words, Gazen. I posted it on the Review forum as you suggested. Please Take Care and Be Well.

cd

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

My Guardian came as well, and boy I love it so much. Unfortunately mine came without a sticker.

Few pics:


Without light temp edit:


With temp edit to make the color look as real as possible:






Edit: I just noticed on the static shielding bag it says 488nm so maybe that's it.

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Ultracrepidarian said:

My Guardian came as well, and boy I love it so much. Unfortunately mine came without a sticker.

Few pics:

Without light temp edit:

With temp edit to make the color look as real as possible:

Edit: I just noticed on the static shielding bag it says 488nm so maybe that's it.

Click to expand...

:drool: Awesome host and photos, I thought of getting one, built the diode into a C6 instead.

The price for the 488nm guardian was $130 for 1 or 2 days, and then was upped to $180 before the price was supposed to increase. Did you end up paying the $130?