WT Trade PHR-803T for Long Open Can

[daguin]

The title says it.

I went to start a project and realized that all of the long open cans I had were already in aiXiz modules. I am going to build this one with a Merideth module. Instead of pushing one out, I would like to see if someone has one harvested that they would like to trade for a 803T blu-ray. The blu-ray is harvested, still in its heatsink, with the ribbon still on it.

Peace,
dave

 

[Kenom]

I'd be happy to push the diode out safely from any module you have. I've sucessfully extracted the diode from many a barrel head and aixiz module with my handy dandy remover.

Or I could sell you one premade you could use yourself for $5 plus shipping. $1.40

 

[daguin]

I'd be happy to push the diode out safely from any module you have. I've sucessfully extracted the diode from many a barrel head and aixiz module with my handy dandy remover.

Or I could sell you one premade you could use yourself for $5 plus shipping. $1.40

Thanks for the offer Kenom. I actually have a plan for these in the aiXiz modules. That's why I put them in there. I just thought that I had another in "the bag." Seems kind of wasteful (and potentially harmful to the diodes) to be swapping them around. Anyway, there is a computer fair tomorrow down the road. I'll just run down there and get a drive or two. It'll be faster than the mail as well.

Peace,
dave

 

[SenKat_Stonetek]

I miss computer shows Jacksonvile, Florida {oooooooooo, I LIKE that ! Jackson-VILE ! HAHAHAHA !!} used to have them about every 6 weeks - used to be some pretty cool crap out there on occasion ! There is supposed to be a smaller (not "Marketpro") show here somewhere, but I guess I haven't looked too hard

 

[sk8er4514]

yo daguin,

I'll trade ya for a 20x long open can for your blu ray. i've been wanting a blu ray for a long time now and I have 3 extra long open cans. its from the Sony deal on NewEgg.

i'll send a PM. I can ship it out to you on Monday if you want to do it.

just curious, what current should your blu ray be pushed at? like 40mA??

 

[Deleted member 13229]

just curious, what current should your blu ray be pushed at? like 40mA??

If you like dim lasers, then go with 40mA ;D Try 90mA-100mA, if you want to push them you can easily get over 100mW out of these things.

 

[daguin]

Re: WT Trade PHR-803T for Long Open Can (CLOSED)

yo daguin,

I'll trade ya for a 20x long open can for your blu ray. i've been wanting a blu ray for a long time now and I have 3 extra long open cans. its from the Sony deal on NewEgg.

i'll send a PM. I can ship it out to you on Monday if you want to do it.

just curious, what current should your blu ray be pushed at? like 40mA??

OK. You're on. [highlight]This offer is now CLOSED[/highlight]

Styropyro is correct. These seem to be very happy to be driven at around 100mA

Please send it priority and make sure it is protected.

Peace,
dave