Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Wrong beam divergence calculation?

XrayX

0
Joined
Aug 24, 2012
Messages
24
Points
3
Hi I buy my first green laser pointer.
And for fun I calculate the divergence .
But the calculator give me 0.34 mRad but I think I didn't make the calcul with good measure for the 2 points needed.

Anybody can help me?
Thank you very much
In the forum i see 0.78mRad for green in general
 





Joined
Sep 12, 2007
Messages
9,399
Points
113
Use metric (or at least convert to metric)
Measure the diameter of the dot in mm at a distance of at least 10m, or the furthest you are able. Longer distance means more accuracy.
subtract 1 (for initial beam diameter)
divide by the distance to the dot in meters

Example:
dot: 33/64 inches at 36 feet
dot: 13mm at 11m
(13-1)/11 = 1.1mRad
 
Last edited:

XrayX

0
Joined
Aug 24, 2012
Messages
24
Points
3
Thank you but I do not all inclusive.
Can you explain all the ways of another?
 
Last edited:
Joined
Sep 12, 2007
Messages
9,399
Points
113
hehdy.gif


Um... wat? I sense a language barrier here.
 

XrayX

0
Joined
Aug 24, 2012
Messages
24
Points
3
oh Sorry for the last message.
I didn't understand what you try to explain to me.
 
Joined
Jun 3, 2007
Messages
2,560
Points
113
oh Sorry for the last message.
I didn't understand what you try to explain to me.

In metric units measure the beam diameter at 30 meters. Then if you want too, measure the beams diameter at distances greater than that for more accuracy. One way to do it is to use a piece of paper draw an + on it. Then mark the + in millimeter increments on all four sides. Now measure a length of 30 meters from the laser pointers position. Then position the + at that distance and center the beam on the +. A piece of window glass can be used to cut off the bloom created by shining on a white paper. Any color paper can be used instead. It's important to know the beams diameter as it exits the laser pointer.
 
Joined
Jan 5, 2011
Messages
417
Points
28
Hi I buy my first green laser pointer.
And for fun I calculate the divergence .
But the calculator give me 0.34 mRad but I think I didn't make the calcul with good measure for the 2 points needed.

Anybody can help me?
Thank you very much
In the forum i see 0.78mRad for green in general

I took a picture from a Wikipedia about Gaussian beams - Gaussian beam - Wikipedia, the free encyclopedia

500px-GaussianBeamWaist.svg.png


A big theta is a full divergence angle. Wiki calls it a "total angular spread". Gaussian optics in various formulas uses just halve of it (a small theta).

A divergence measurement should be done at two locations at a far distance. How far? It depends on the initial beam diameter. Probably yours is ~1 mm, and it corresponds to zR (a Rayleigh range) ~1.5 m.
Thus start your first beam diameter measurement at 2 m and the second farther.
You'll get DiameterOne at LocationOne, and DiameterTwo at LocationTwo.

Full Divergence = (DiameterTwo - DiameterOne ) / DistanceBetweenTwoMeasurements.

For a better accuracy try to go as far as possible.

Compare your result with the theory:

theta = wavelength / pi / InitialRadius

wavelength = 532 * nm = 532 e-9 m
 

XrayX

0
Joined
Aug 24, 2012
Messages
24
Points
3
wow thanks every body.I go calculate my divergence.
But last night i see my beam is like that ->
 

Attachments

  • beam (Copier).jpg
    beam (Copier).jpg
    21.9 KB · Views: 1,080

XrayX

0
Joined
Aug 24, 2012
Messages
24
Points
3
No i have this
 

Attachments

  • 20121211_215305 (Copier).jpg
    20121211_215305 (Copier).jpg
    45.7 KB · Views: 265
  • 20121211_215329 (Copier).jpg
    20121211_215329 (Copier).jpg
    47.7 KB · Views: 258
  • 20121211_215336 (Copier).jpg
    20121211_215336 (Copier).jpg
    52.7 KB · Views: 279
Last edited:

XrayX

0
Joined
Aug 24, 2012
Messages
24
Points
3
Yes its removable.
Do you know how to extract the head? (the part with the "coper" ring)
 

XrayX

0
Joined
Aug 24, 2012
Messages
24
Points
3
I took a picture from a Wikipedia about Gaussian beams - Gaussian beam - Wikipedia, the free encyclopedia

500px-GaussianBeamWaist.svg.png


A big theta is a full divergence angle. Wiki calls it a "total angular spread". Gaussian optics in various formulas uses just halve of it (a small theta).

A divergence measurement should be done at two locations at a far distance. How far? It depends on the initial beam diameter. Probably yours is ~1 mm, and it corresponds to zR (a Rayleigh range) ~1.5 m.
Thus start your first beam diameter measurement at 2 m and the second farther.
You'll get DiameterOne at LocationOne, and DiameterTwo at LocationTwo.

Full Divergence = (DiameterTwo - DiameterOne ) / DistanceBetweenTwoMeasurements.

For a better accuracy try to go as far as possible.

Compare your result with the theory:

theta = wavelength / pi / InitialRadius

wavelength = 532 * nm = 532 e-9 m

Thank you to all the people who have responded.
I calculate a divergeance of 0.71875mRad.
There is a difference good or very bad?
It is true that my other income (0.34mRad)
 
Joined
Jan 5, 2011
Messages
417
Points
28
Thank you to all the people who have responded.
I calculate a divergeance of 0.71875mRad.
There is a difference good or very bad?
It is true that my other income (0.34mRad)

If you observer that a beam is focusing, the laser divergence can be improved. Just need to adjust a lens, if such possibility exists.

Only you can answer it is good or bad (0.7mrad). Would you loose anything if it is 1.5 mrad, or gain if it is 0.1 mrad? :na:
 




Top