ZapU
0
- Joined
- Aug 9, 2010
- Messages
- 393
- Points
- 0
Mine is working fine. I'm using the training head with the lens removed. The whole thing gets pretty warm after a while so I figure that it's doing a decent job at pulling heat away from the diode.
My only gripes are a bit of side-splash on the beam and that the lens can't be set closer to the diode to allow for a smaller beam diameter.
Carefully scrape off the epoxy on the lens, then you can turn it with a flat bladed screwdriver to change the focus. See post #278
Here's a link to a video of it after the adjustment
Last edited: