Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

What is the easiest-to-disassemble pointer host?

Xer0

0
Joined
Dec 2, 2008
Messages
464
Points
0
Thats the question, yeah! ;D

I know Rog tuned one of the Violet Pointers from Boblaser and said the host opened very flawlessly and much easier then the default leadlight ones. But which one of those pens which are avaiable at Day's GB would you recommend as the most happy one? which is most simple to tune, which to put an aixis inside?
 





Re: What is the easiest-to-disassemble pointer hos

no idea?

/time: 14:05. ha!
 
Re: What is the easiest-to-disassemble pointer hos

Most modules should provide the same experience, because nearly all the hosts are designed for those standard green laser modules. Therefore the length, button placement, and diameter is nearly exactly the same. It also means those Axis modules will have the same amount of room to work with in nearly all barrels. The barrels usually have apertures that are pressure-fit to the front, so they should be easy enough to remove.

For myself I'd go with the #1 model (top left) in Day's photo selection, if only because the module unscrews close to the button so it'll be easier to position the module, and remove any module if present.
 
Re: What is the easiest-to-disassemble pointer hos

@ Bionic Badger- The module does not "unscrew" it is pressed in. If you attempt to unscrew the module you run the risk of breaking it. Gently wiggle it back and forth while pulling outward and you will get it out. DO NOT UNSCREW.
 
Re: What is the easiest-to-disassemble pointer hos

yobresal said:
@ Bionic Badger- The module does not "unscrew" it is pressed in. If you attempt to unscrew the module you run the risk of breaking it. Gently wiggle it back and forth while pulling outward and you will get it out. DO NOT UNSCREW.

Sorry, when I misused "module" I actually meant "barrel" not the module that might be in the barrel. Earlier, before I hit "Post" I had made some corrections to my misuse of "module," but must have missed that last one. I'm also referring to the blank modules--barrels I mean--which Day is selling for $4-$5 each.
 
Re: What is the easiest-to-disassemble pointer hos

Jayrob has a nice, new, already disassembled pen host in the B/S/T section. Look great, no disassambly required, only assembly.
 


Back
Top