gozert
0
- Joined
- Nov 18, 2014
- Messages
- 1,076
- Points
- 63
My quote, post #30
Why would I remove your quote? There's no reason for doing that. You just quoted me too, I'm not asking you to remove my quote for no reason either. It doesn't make sense.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
My quote, post #30
You said you would do it yesterday in a PM.
I've been trying for a while now...tried it again, but no matter how far I screw it out, the dot only gets bigger. When I screw the lens into the module as far as I can, I still get a dot that's about 6-8 inches on a wall only 15ft away. Any suggestions?
Just DON'T use cyanoacrylate super glue.
It can fog lenses. How long can these PL
520 run with no heatsink?
Thanks for the warning. That is the glue I wanted to use. What kind of glue do you recommend?
While its true that many members have attempted to help you..
--ah-- How can I say this w/o being rude..
you would be far from the first who just could NOT wait to do things the right way-- DTR does NOT want to insult you BUT just how are you fiddling with the focus and still keeping the duty cycle so short-
SUPERGLUE oh no////
you own LS a +rep for that--:beer:
personally I avoid glue- springs help keep lenses in place when there is room- a VERY tiny bit of Teflon tape on the threads works for me BUT I did ruin one lens/diode when some got on the die window- avoid Teflon if you plan to continuously mess with yr focus-but most important NO HEAT SINK = no testing -- not just yet-- always good to learn from fails BUT no reason they must be done with spendy laser diodes-
:yabbem:
hak
Well, I was going to just let this go, but this
is my reputation. You went back on your
word.
The Lightning Stalker said:He runs a website called rockbullet.tk. The image is
hosted on there. Every time a host loads the image,
their IP address can be recorded. He can then use the
IP in an attack to attempt to gain control of our
computers or social engineer our ISP to give out our
names and addresses.
I have noticed he now appears to be targeting me
personally. I would appreciate it if you would also delete
the quote of my message as well, as it only adds more
fuel to his fire.
Thanks,
The Lightning Stalker said:You quoted me in the above post.
You don't have to delete it, but I
appreciate it if you would remove
the quote.
Thanks,
Gozert said:Oh I didn't notice that one. Will remove the quote, no problem.
The Lightning Stalker said:The sooner, the better.
In the first place you asked me to remove one specific quote of you, and I did so. Stop bullshitting me on removing every quote of you, and the spambot's quotes because of some "IP-tracking". If quoting someone would result in getting your IP, address and name tracked. There wouldn't be a single forum supporting quotes anymore, and the internet would actually be a risk to use. You really do not know much about computers, networks and the overall internet.
That is one of your PM's to me. First off, the guy had never posted a single image, it was all text. Second off, if the guy wanted to track you, me or someone else so badly, he would've been able to do it with various other methods.
Second PM. You asked me to remove yet another quote which didn't make sense at all. Still I proceeded in removing that quote.
The Lightning Stalker said:gozert said:The Lightning Stalker said:He runs a website called cockpullet.pk. The image is
hosted on there. Every time a host loads the image,
their IP address can be recorded. He can then use the
IP in an attack to attempt to gain control of our
computers or social engineer our ISP to give out our
names and addresses.
I have noticed he now appears to be targeting me
personally. I would appreciate it if you would also delete
the quote of my message as well, as it only adds more
fuel to his fire.
Thanks, :beer:
I believe it's not an image, just plain text. So it probably won't do any harm. You'll have to remove the quote from your own message though, I can't edit someone elses messages.
Thanks for the heads up though.
http://laserpointerforums.com/f44/testing-dtr-module-without-host-92757-2.html#post1352002
You quoted me in the above post.
You don't have to delete it, but I
appreciate it if you would remove
the quote.
Thanks, :beer:
The Lightning Stalker said:I believe I've done everything to please the guy, and in the end he decides to just negative rep me for no reason whatsoever. This is pathetic, that is all I can say.
No one is bullshitting you. YOU are
reopening this wound by attempting to sully
my reputation, bringing our private
conversation out into the public, and now
belittling my intelligence.
Just because you can't see it doesn't mean
it isn't there. This is why the moderators
deleted it and banned him so quickly. And
worse, by posting that quote, you are
making it possible for curious innocents to
look at that site again and be victims of
whatever this wearied person or group
perpetrates.
Nope, you didn't. It's still there. Just
caught you in yet another lie. Here is the
original message in its entirety, including
the link that has been 'mysteriously' left
out.
This links directly to post #30, which
still contains a quote of mine, for all to
see, at least while I am typing this post.
You're right. It's pathetic. This never
should have happened.
I asked you nicely if you would remove the
quote, and it would have been no big deal
if you had said no or just didn't answer or
whatever, but you said you would remove
it. It's just a simple little thing that
takes a couple seconds. You lied to me,
saying you would remove it, and that is why
I negged you, for going back on your word.
Negs aren't permanent. They eventually
scroll off the bottom, like they never
happened. They are only a problem for real
douche bags who keep getting them, and they
eventually get down below 0 rep and turn
red. They usually end up banned as well
because it reveals something about their
character.