Steampunk Lumia #1

[Jmillerdoc]

Thanks guys. This is a basic thrown together "proof of concept" which needs some additional work to really make it a complete unit. Time is my most valuable commodity right now and when I have some extra to burn I will make the final presentation of this idea. As far as the blue goes, I actually used four colors on it the other night with all four handhelds in each of the basics, blue, red, green, violet. The blue was running at about 1.6w with 3 element, red 635 at 1w, green at 400 mW and violet at 1.2w. The only one that seemed really out of balance was the violet. The blue at this power was perfect with the others. Clearly not what I want as a final design for something made for un sheilded eyes to watch.

 

[hakzaw1]

my sig was made with two 635 400mW JETLASERS-
the green IIRC was 500mW and the blue was also 500mW no 405 was used-

AixiZ has a line of 12vdc mini lab lasers in all four colors=matching and stackable drivers too-- all over spec- all under a for real warranty- BUT got the green you may want to go with one at a lower power than AixiZ offers in the same form factor-
Very little green is ever needed in Lumia-and it very easy to have too much green-

If you want to buy a set of 12vdc labbies pick the powers you like and send your order to me & I will apply for a discount from AixiZ for you--at the very least I think I can get you free shipping on three or four labs. Depending upon where you live--
these mini labs were requested by forum members and most had LUMIA in mind-
they have 515nm green 26mW modules too..... good power for LUMIA-($85)
and quick plugs that allow diode attachment w/o the need to solder-

If you see something AixiZ needs to sell PLEASE just PM me--hak