Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

sorry for being an asshole

wesdaman14

wesdaman14

0
Joined
Mar 2, 2008
Messages
1,500
Points
0
Hi Guys. for the time being over my 1 week ban,i have realized what all i have been doing wrong on this forum. i was being very immature and not taking advice the way it was given to me. I Have Thought and thought,and i have changed my ways. If you see me being immature,please report it to cOldshadow so he can ban me again. I will now try to start a good name again,but all of yall will remember what i did wrong and still make fun of me. Please help me out. ok that out of the way now, Im Build me a blu ray laser.
i need 2 things. 1 a PHR diode,and a Rckstr driver. i need to know if 150ma is safe for this diode if i only use it about 5 mins a day at 1min/1min off. Also where can i find the diodes ?? Thanks all who help me Recover here.
 





Wesdaman14 said:
Hi Guys. for the time being over my 1 week ban,i have realized what all i have been doing wrong on this forum. i was being very immature and not taking advice the way it was given to me. I Have Thought and thought,and i have changed my ways. If you see me being immature,please report it to cOldshadow so he can ban me again. I will now try to start a good name again,but all of yall will remember what i did wrong and still make fun of me. Please help me out. ok that out of the way now, Im Build me a blu ray laser.
i need 2 things. 1 a PHR diode,and a Rckstr driver. i need to know if 150ma is safe for this diode if i only use it about 5 mins a day at 1min/1min off. Also where can i find the diodes ?? Thanks all who help me Recover here.
Click to expand...


Welcome back, Wes.

You can get a sled (with the diode) from DDL right now and the Rkcstr drivers are always available from Rkcstr. At 150mA input, you should be able to use the laser for significantly longer than 1 on - 1 off. If you build it with a good heat sink, you can burn these at 150 for a long time before they begin to heat up.

Peace,
dave
 
Hi David, i could not locate the thread to which you were referring to ?
Can you please point me in the right direction ? Thanks
 
look in the stickies in the buy,sell, trade area. his post is there with a link.
 
You must log in or register to reply here.





Back
Top