- Joined
- Sep 16, 2007
- Messages
- 3,660
- Points
- 113
Hi, guys.
I have for sale my DIY "Frankenstein" greenie. SOLD
It is built with the guts of a CNI GLP and some various optics for better (lower) divergence than the stock assembly.
The crystals have been carefully re-aligned by me for optimal output and beam quality.
Average output is usually >150mW.
Highest peak I've seen from this laser was 199mW on my Laserbee.
Today it peaked at 169mW.
I have not used it for a long time and today, unfortunately, I discovered that the LED indicator no longer functions (burned out, I guess) so I removed it from the driver after trying to get it functioning again. I don't think this is a big deal but I did like the little LED.
This is a great little laser - it is compact, powerful, and bright.
It runs on 2 AAA batteries. I will include a pair of very good Sanyo 1000mAh batteries.
This laser has some minor cosmetic wear but is still in good condition.
SOLD
This video shows 2 power tests. Each about 100 seconds long. You can see that it stays above 150mW for the greater part of its duty cycle.
SOLD
I also have an assortment of laser diodes.
These will be sold as a "lot." Do not ask me to separate the items.
Included:
1 brand new LOC LPC-815 655nm diode (250mW+)
1 brand new Sanyo 635nm diode (20mW)
1 brand new 685nm 35mW diode
1 PHR-803T diode (tested to 125mW)
1 635nm 10mW diode (tested)
1 brand new R/IR 655nm/780nm combo diode from 10X blu-ray burner
1 BDR-S06J sled with all optics and R/IR combo diode (no blu-ray diode)
3 brass laser modules
1 probably 5mW 650/635nm diode
SOLD
Special shipping options like insurance, international, signature confirmation, etc. are available at buyer's expense & request.
Post here if interested. Please do not PM me unless you have a specific question that is not answered in this post. I do not spend much time on this forum and may not get to your PM.
I have for sale my DIY "Frankenstein" greenie. SOLD
It is built with the guts of a CNI GLP and some various optics for better (lower) divergence than the stock assembly.
The crystals have been carefully re-aligned by me for optimal output and beam quality.
Average output is usually >150mW.
Highest peak I've seen from this laser was 199mW on my Laserbee.
Today it peaked at 169mW.
I have not used it for a long time and today, unfortunately, I discovered that the LED indicator no longer functions (burned out, I guess) so I removed it from the driver after trying to get it functioning again. I don't think this is a big deal but I did like the little LED.
This is a great little laser - it is compact, powerful, and bright.
It runs on 2 AAA batteries. I will include a pair of very good Sanyo 1000mAh batteries.
This laser has some minor cosmetic wear but is still in good condition.
SOLD
This video shows 2 power tests. Each about 100 seconds long. You can see that it stays above 150mW for the greater part of its duty cycle.
SOLD
I also have an assortment of laser diodes.
These will be sold as a "lot." Do not ask me to separate the items.
Included:
1 brand new LOC LPC-815 655nm diode (250mW+)
1 brand new Sanyo 635nm diode (20mW)
1 brand new 685nm 35mW diode
1 PHR-803T diode (tested to 125mW)
1 635nm 10mW diode (tested)
1 brand new R/IR 655nm/780nm combo diode from 10X blu-ray burner
1 BDR-S06J sled with all optics and R/IR combo diode (no blu-ray diode)
3 brass laser modules
1 probably 5mW 650/635nm diode
SOLD
Special shipping options like insurance, international, signature confirmation, etc. are available at buyer's expense & request.
Post here if interested. Please do not PM me unless you have a specific question that is not answered in this post. I do not spend much time on this forum and may not get to your PM.
Last edited:
