Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

Sold

Re: 445 140 Diodes $46 Shipped US (PM for International)

How involved will the construction process be if I order one of these pre mounted with leads soldered on. I plan on using the JayRob black 18650 host with the hot option. I really want a 445nm laser, but not going to attempt this build myself if it's challenging.
 





Re: 445 140 Diodes $46 Shipped US (PM for International)

2007Revolution said:
How involved will the construction process be if I order one of these pre mounted with leads soldered on. I plan on using the JayRob black 18650 host with the hot option. I really want a 445nm laser, but not going to attempt this build myself if it's challenging.
Click to expand...

If you got a hot option kit and the diode with the leads attached in a module you should be able to have it up and running in 5 minutes.

Soldering a wire to a wire is very forgiving in comparison with trying to solder to the diode pins. You can heat the wire up all you want and It will not hurt your diode.:beer:
 
Last edited:
Re: 445 140 Diodes $46 Shipped US (PM for International)

this relates to 2007revolution question very much. How hard would it be to do in a Ehgemus host (I really like his hosts). If i buy the diode I would have it in a aixiz module with leads soldered on. So basically what would I have to do, and it it hard because this would be my first build. And I dont have enough money to skrew up or to try another build first.

Thanks,
Trever :D
 
Re: 445 140 Diodes $46 Shipped US (PM for International)

trever22 said:
this relates to 2007revolution question very much. How hard would it be to do in a Ehgemus host (I really like his hosts). If i buy the diode I would have it in a aixiz module with leads soldered on. So basically what would I have to do, and it it hard because this would be my first build. And I dont have enough money to skrew up or to try another build first.

Thanks,
Trever :D
Click to expand...

Well Ehgemus does not have a hot option where he sets the driver to the desired current and all you have it two leads that need to be attached to the diode like Jayrob does. So you would need to do that yourself.;)
 
Re: 445 140 Diodes $46 Shipped US (PM for International)

Excimer your diodes went out today.:beer:
 
Re: 445 140 Diodes $46 Shipped US (PM for International)

wingfat your diode pressed in a module went out today.;)
 
Re: 445 140 Diodes $46 Shipped US (PM for International)

Hi:

I need the diode pressed into a module and wires soldered. Would the price then be $46+10 = $56 ?

-Raj
 
Re: 445 140 Diodes $46 Shipped US (PM for International)

rkovvur said:
Hi:

I need the diode pressed into a module and wires soldered. Would the price then be $46+10 = $56 ?

-Raj
Click to expand...

That would be correct. Sent you a PM.:beer:
 
Re: 445 140 Diodes $46 Shipped US (PM for International)

:paypal: Thanks!! :beer:
 
Last edited:
Re: 445 140 Diodes $46 Shipped US (PM for International)

trever22, cd520 and 532 with Envy your diodes went out today.:beer:
 
Re: 445 140 Diodes $46 and 150 diodes $56 Shipped US (PM for International)

rkovvur and laser guided your diodes went out today.;)
 
Re: 445 140 Diodes $46 and 150 diodes $56 Shipped US (PM for International)

DTR whats the most you ever push a A140 and or A150 aka what was avg output. i am thinking of building a 445 labby i have a 200mw green and 200mw red labby be nice if i all 3
i be using a P3 driver to feed it and i have the same bench power supply you have in your vids + a few 10amp 9volt wall warts that can feed a P3 with ease
and my buddy is out of town he comes back Monday i can take pic's when he is back he has his camera with him and btw anyone have something they want me to get pic's of at CES i will going my passes came yesterday (not tell 1-4-11).
 
Re: 445 140 Diodes $46 and 150 diodes $56 Shipped US (PM for International)

techmasterjoe said:
DTR whats the most you ever push a A140 and or A150 aka what was avg output. i am thinking of building a 445 labby i have a 200mw green and 200mw red labby be nice if i all 3
i be using a P3 driver to feed it and i have the same bench power supply you have in your vids + a few 10amp 9volt wall warts that can feed a P3 with ease
and my buddy is out of town he comes back Monday i can take pic's when he is back he has his camera with him and btw anyone have something they want me to get pic's of at CES i will going my passes came yesterday (not tell 1-4-11).
Click to expand...

Most of these diodes will give you about 1.9W being driven @1.8A with a G-1 lens. There are some variations in efficiency with these diodes and to take for example the most efficient one I had was in my Frankenstein and it gave over 2W @ 1.75A. Then there are some on the low side that you can drive @1.8 that will only give 1.75W.

If you look at the one cd520 got from me at the top of this page was giving almost 1.8W driven @ 1.5A. I believe it is the one that he now has in his SS 18650 that is giving 2.1W @ 1.8A. So it is kinda the luck of the draw.:beer:
 
You must log in or register to reply here.


Back
Top