Sale thread/ Hosts/Heat Sinks/Focus adapters/lasers

[Lifetime17]

BUMP....

 

[Lifetime17]

Hi LPF,
These two builds are SOLD ....

 

[RedCowboy]

Great deal.

 

[Lifetime17]

Hi Red,
The MUBMOA side button had a 3X Sanwu BE with an adapter made to switch from the Ball lens with the asthetic focus adapter.
You can use it with or without the BE.
Rich

 

[Lifetime17]

SOLD.......
Hi,
Here's a tiny 1X16340 Tran Teal Host, prewired great for the lower powers SM diodes.
Thanks for looking guys.
Rich

 

[Lifetime17]

Hi, SOLD........
Here I a red powder coated 1X18650/2X18350 prewired host. Ready for a 12mm DTR module solder two wires your done.
Rich

 

[Lifetime17]

FOR SALE.. 160.00 + shipping...
Hi LPF,
Here is a Convoy S11 host with a big mass copper heat sink and focus adapter.
Driver set to 1.8A / G2 lens and holds 2X26350 batteries . This build weighs in nicely With the full copper sink , custom 22mm contact board wired with 22AWG silicone wire.
Rich

 

[Lifetime17]

Hi LPF ,
1) .. Also I still have these two 520nm builds up for sale ..
First is a PL520B full copper host 1x10440/ 3E lens
120.00 + shipping
2).. Here is a PL520/ 1x14500 / G2 lens.
90.00 + Shipping
Thank You Rich
85.00 + shipping

 

[Lifetime17]

FOR SALE.. 40.00 + shipping
Hi,
Here is a C6 host aluminum extended heatsink and focus adapter prewired . Drop in your DTR 12mm module solder two wires..
Thank You Rich

 

[Lifetime17]

FOR SALE... 130.00 + shipping...
Hi LPF,
Here is a carbon fiber wrap host , housing a 488nm diode with a 2 Element lens. It holds 1X18650 battery
Thank You Rich

 

[Lifetime17]

Hi,
BUMP......

 

[Lifetime17]

Hi,
BUMP......

BUMPED!!!!

 

[GSS]

Wow, that 488nm carbon fiber wrapped host is pretty, 132mw's of Aqua Blue
How are those 26350 battery's Rich. That opens up a world of options and I can imagine just how hefty that 520nm Convoy build is..

 

[Lifetime17]

Hi, Gss,
The 488 nm came out really nice I was surprised at 132mW's the beam is a real bright aqua blue. And the beam divergence is great with the 2 E lens. The 26350 batteries fit in the convoy S11 perfectly and with the copper sink and adapter it weighs in hefty . Those Sharp 520's are a nice diode , the driver is set at 1.8A and reaches over 8W's stable. Its nice to see this diode with a can on it for a change . Although I dont mind the Ball lens diodes in 525nm ... Some nice builds to offer folks and some reasonable hosts as well.
Rich

 

[Lifetime17]

BUMP......
Thanks Rich

 

[Snecho]

Hi, Gss,
The 488 nm came out really nice I was surprised at 132mW's the beam is a real bright aqua blue. And the beam divergence is great with the 2 E lens. The 26350 batteries fit in the convoy S11 perfectly and with the copper sink and adapter it weighs in hefty . Those Sharp 520's are a nice diode , the driver is set at 1.8A and reaches over 8W's stable. Its nice to see this diode with a can on it for a change . Although I dont mind the Ball lens diodes in 525nm ... Some nice builds to offer folks and some reasonable hosts as well.
Rich

I'll take that 8W 520nm