Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Sale thread/ Hosts/Heat Sinks/Focus adapters/lasers

Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi LPF,
Here is a 2X18650 Satin Black powder coated host. It has a milled in driver shelf and a new 5A latching switch. It will come prewired with 22Awg silly cone wire contact boards with springs.
Thanks for looking guys PM me if interest ..
Rich:)
Rich:)fullsizeoutput_9b8.jpegfullsizeoutput_99e.jpegfullsizeoutput_99f.jpegfullsizeoutput_9a0.jpegfullsizeoutput_9a2.jpeg
 
Last edited:





Joined
Jul 10, 2015
Messages
9,799
Points
113
https://www.ebay.com/itm/50000-LED-Tactical-Flashlight-Zoomable-Focus-Torch-18650-AAA-XML-T6-Lamp-Light/173491554610?_trkparns=aid=555018&algo=PL.SIM&a...
Red did you ever do anything with this one? I bought the last one for like $4 when you posted it about a year ago:)
I'm keeping it as a light but its more like a cast aluminum than usual but I like the slide focus..

No, I decided I like the look of the skyray better for that size build, I just get a skyray from Rich and use the light as the zoom is pretty handy for a cheap light. :)


Hi LPF,
Here is a 2X18650 Satin Black powder coated host. It has a milled in driver shelf and a new 5A latching switch. It will come prewired with 22Awg silly cone wire contact boards with springs.
Thanks for looking guys
Rich:)View attachment 62336View attachment 62337View attachment 62338View attachment 62339View attachment 62340


That is SWEET, I like the dark coating for late night lazing, I bet it hides in the night better.....until you fire it up that is. :D
 
Last edited:
Joined
Dec 15, 2014
Messages
6,775
Points
113
Thanks I think a big green would go good with this or anyWL for that .
Oh here are a few more hosts
1) 1X14500 copper sink brass knob rear latching switch nice and cool for a BDR-209/405nm diode.... SOLD !!
2) Here is a side button 1X18650 or 2X18350 this sink is huge for this host so it will make a nice laser with good sinking
Oh the 2x18350' fit a little snug but it still sets ups fine
Enjoy Rich:) PM me if interested..:)
Rich:)fullsizeoutput_9a6.jpegfullsizeoutput_9a7.jpegfullsizeoutput_9a9.jpegfullsizeoutput_9a6.jpegfullsizeoutput_9a7.jpegfullsizeoutput_9a9.jpegfullsizeoutput_9a4.jpegfullsizeoutput_9a5.jpegfullsizeoutput_9b6.jpeg
 
Last edited:
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi Folks ,...... SOLD...
Here is a translucent Red 1X14500 host rear clicky prewired ready to drop in your favorite Red diodes.
PM me if interested.
Thanks for looking.

Rich:)fullsizeoutput_9b4.jpegfullsizeoutput_9ac.jpegfullsizeoutput_9ad.jpegfullsizeoutput_9ae.jpeg
 
Last edited:
Joined
Apr 2, 2009
Messages
10,662
Points
113
Is Zap what we now call a 'hit & run' ?? he sez he 'only' wants to sell his laser so...
... we will not need an intro from him..--BYE
 
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi Len,
No intro and a sale doesn't digest well around here , when folks come on the forum like that it makes you feel being used . Not good at all..

Anyway here is a nice 505nm 1X10440 copper sink build I did. Enjoy the pics folks,

Rich:)fullsizeoutput_9c0.jpegfullsizeoutput_9bf.jpegfullsizeoutput_9be.jpegfullsizeoutput_9bd.jpegfullsizeoutput_9bc.jpeg
 
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi Red,
Thanks I usually don't machine these small 1x10440's but I had a little time . I was going to throw in a 488nm diode but I did a 505nm instead. Have quite a few of both diodes.

Rich:)
 
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi LPF, Still up is this 2X18650 Satin Black host with a 5A latching switch prewired to drop in a DTR 12mm module . The heat sink has a driver shelf built in.

Rich:)
 

Attachments

  • fullsizeoutput_9a2.jpeg
    fullsizeoutput_9a2.jpeg
    146.7 KB · Views: 8
  • fullsizeoutput_99e.jpeg
    fullsizeoutput_99e.jpeg
    127.7 KB · Views: 8
  • fullsizeoutput_9a0.jpeg
    fullsizeoutput_9a0.jpeg
    117.4 KB · Views: 9
  • fullsizeoutput_9b8.jpeg
    fullsizeoutput_9b8.jpeg
    153.7 KB · Views: 9

Encap

0
Joined
May 14, 2011
Messages
6,113
Points
113
Really nice work, Lifetime17

Your custom hosts and various coatings are looking very good indeed.
 
  • Like
Reactions: GSS
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi E,
fullsizeoutput_9cc.jpegfullsizeoutput_9d3.jpegfullsizeoutput_9ce.jpegfullsizeoutput_9cf.jpegfullsizeoutput_9d0.jpegfullsizeoutput_9d1.jpegThanks buddy need to add different finishes to the hosts along with the CU,AL and Brass hosts. trying to bring out variety .

Ok LPF here is a 2X18350 prewired AL host , One catch please dont ask why had a brain fart . It will need a 5/64 hex wrench to tighten the set screw sorry. But for the price not bad .. Some pics..

Rich:)
 
Last edited:




Top