Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Sale thread/ Hosts/Heat Sinks/Focus adapters/lasers






RedCowboy said:
When he says wired in the case of tail switched he attaches wires to the spring board and you solder in your diode driver and there is a set screw in the heat sink so you can apply a little thermal paste and use the set screw to hold your module in place, there is no plug you simply solder and heat shrink two wires or trim and solder the spring board wires to your driver as he gives you plenty of wire length, it's easy and lots of fun, just remember to always be safe.

Here's a 501 I got from Rich that had a blacked out sink, I decided to sand the lands and leave the grooves black as well as the front of the sink and center front of the adjuster which I think looks really good although this pic is not doing it justice.

View attachment 63341

and one more.......

Here's a host I recently got from Rich, I put in a NDB7875 @ 2.4a and it's good for 60 second runs or so and I only use EFest 18350 IMR cells as they hold up well for me.
I wonder how it would look with a red powder coat with the lands sanded ?

View attachment 63339

View attachment 63340

If you have an idea for a build let Rich know and he can make it happen for you, I am thinking about a fairly compact 7A75 with a 4X c-lens pair enclosed in the nose so it's a tight beam fixed focus, should be a fun one.
Click to expand...

Hi, Red!!
I’ve thought of doing a compact build similar but with a Mitsubishi 500 diode.
Maybe a SS C6 or similar and replace the bezel nut with a tube and mount to house the c-lens pair. Then seal er up with a machined end cap......one day😉

SGD🍻
 
I always enjoy a hot beam that's been corrected, you just point and lase, no need to focus anything.
 
Shotgundrums said:
Hey, Richie I remember that pen. Big power, small package. ThT sure is a sharp pen!!
SGD🍻
Click to expand...
Yeah that thing is nuts! How you been SGD? Glad to see you’re still here. I don’t get on as much as I used to, I actually forgot my password a while back and had to sit for like an hour trying to remember lol!
 
That's a good looking little host Rich, I would snatch it up if I still used 14500's at all.....if it's around I may add it to my next order but it's too cool to hang around I bet........a 488nm would go good in that host.

Did you get any of those convoy M1 bodys ?
 
Last edited:
Hi LPF, SOLD......
Here is a Convoy M1 host Matte black powder coated Aluminum sink and adapter . Its prewired with 24AWG silicon wire .
Holds 2X18350's or 1X18650 battery.
$ 45.00 + shipping.
Thank You Rich:)635586355963560635616356263563
 
Last edited:
Hi GSS,
Thank You buddy the outlaws are coming over today to celebrate , a great time with family.

Rich:)
 
Oh, Happy Birthday Rich.

Image result for happy birthday laser gif
 
Last edited:
You must log in or register to reply here.





Back
Top