Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Red/blu ray






Re: Custom built lasers:Red/blu ray - choose your

Oooo, interesting.
Sure you will get quite a few people wanting these
 
Re: Custom built lasers:Red/blu ray - choose your

How long would the lasers last? :o
 
Re: Custom built lasers:Red/blu ray - choose your

JapanMan2 said:
How long would the lasers last? :o
Click to expand...
depends on how long you run it each time and how hot it gets. if you use it for short periods of time likr 20 seconds on 20 seconds on it will last several years. but if you continuously overheat it it won't last long. 110mW with a phr 803t will last a long time if you keep it cool
 
Re: Custom built lasers:Red/blu ray - choose your

I totally wanna buy one but I need to save up some moneys first... :(
 
Re: Custom built lasers:Red/blu ray - choose your

I can vouch for likeitbright's top quality work
 
Re: Custom built lasers:Red/blu ray - choose your

Thanks man :) If you need anything else just say the word.
 
Re: Custom built lasers:Red/blu ray - choose your

will probably be ordering a red one in a couple weeks :)
 
Re: Custom built lasers:Red/blu ray - choose your

I like this design. Does the diode stick directl into the heatsink?


Nice work there. Good to know, that you can make a design by yourself as well.


EDIT: And no, i'm not kidding. I really like the internal design in this case. I think it's good.
 
Re: Custom built lasers:Red/blu ray - choose your

IgorT said:
I like this design. Does the diode stick directl into the heatsink?


Nice work there. Good to know, that you can make a design by yourself as well.
Click to expand...

Currently I'm still using the AixiZ module head to house the LD but have been experimenting with solid sinks with reamed 5.60mm diameter holes and then threading the 9x0.5mm thread for the AixiZ lens as this is a standard thread. Did you read my reply to your other post in the copper HS thread? You will see that we both independently arrived at this design as it is the most logical one.
 
Re: Custom built lasers:Red/blu ray - choose your

If that is so, then i apologise. But you have to admit it would be a huge coincidence.
 
Re: Custom built lasers:Red/blu ray - choose your

IgorT said:
If that is so, then i apologise. But you have to admit it would be a huge coincidence.
Click to expand...

No apology necessary - in retrospect I should have been more observant and seen this possible misunderstanding before it happened. Its not your fault. I agree it looks like a huge coincidence at first glance but I feel on closer examination its not as unlikely as it appears. We are both scientists/engineers trained in this way of thinking. Given we have only one set of components and dimensions to work with it makes more sense than you might initially expect that the sinks would looks similar (there will be some difference I'm sure in the AixiZ module pocket depth and flexdriver pocket depth). The thing which is probably the 'coincidence' is that we started thinking about a sink for this host at a similar time. But then again - its not that hard to see why. I ordered at blu-ray from both yourself and TheMonk - both of which are fine lasers but I liked the host you used due to its potential to take a much larger sink that the AAA style traditional hosts can take. I decided to pursue making sinks for whatever host people were interested in for a reasonable price - and of course the Romisen is one fine host people will obviously wish to use. So you see - its possibly more likely than we realised at first?
 
Re: Custom built lasers:Red/blu ray - choose your

Don't suppose you could build labys?
 
Re: Custom built lasers:Red/blu ray - choose your

lamborgini8 said:
Don't suppose you could build labys?
Click to expand...
Yes I can. What people want in the way of a labby varies considerably so you'd have to send me dimensions.
 
You must log in or register to reply here.


Back
Top