Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

PLUG & PLAY CO2 BURNING LASERS only $150 DELIVERED

Re: OUTRIGHT BUY! 15W RF EXCITED CO2 BURNING LASER

Only 4 amps? That sounds real nice, Mike! Then I might be able to play around with my first 9,7A PowerSupply (should be here soon) before I get the second one that I intend to parallell. Let's just hope there is enough current to actually ionize the gas.

/Tottish
 





Re: OUTRIGHT BUY! 15W RF EXCITED CO2 BURNING LASER

Hey Mike never did hear from Chris on the pwms that tottish made dont need it anyway... I didnt receive my power Transistor today so it wont be here till Monday like the sales person told me hope things are going well Lynn :)
 
Re: OUTRIGHT BUY! 15W RF EXCITED CO2 BURNING LASER

Lynn --
I'm machining the parts to mount my tube in a 2" PVC pipe -- Getting near done.  Good luck on the transistor.

Also, it sometimes has to be pushed to 6 or 7 amps to start.  After that, mine starts and runs at ~ 4 amps minimum.  Remember my comments above about low power  and my fix for that.

Mike
 
Re: OUTRIGHT BUY! 15W RF EXCITED CO2 BURNING LASER

yes larger capisitor and lot of ferrit and dont go to low on power somthin like that... good luck with the pvc sounds cool got to see pics :)
 
Re: OUTRIGHT BUY! 15W RF EXCITED CO2 BURNING LASER

It's in the pipe and works but all there is to see now is a pipe with coax coming out. I used a 20" piece and machined mounts to fit the inside curve. Now to mount the PS underneath --- then the cells......

Mike
 
Re: OUTRIGHT BUY! 15W RF EXCITED CO2 BURNING LASER

Sounds Good Mike, I was just ordering some peltiers, I broke the one I had trying to get that aluminum plate off, gona get a real thin piece of copper and paint it black :D
 
Re: OUTRIGHT BUY! 15W RF EXCITED CO2 BURNING LASER

The scientech sensors have one side of the TEC "glued" to the mass heat sink. The other ceramic side is ceramic coated with a "special" high temp flat black coating. No copper stuff. I can wipe the burned coating off with solvent and spray more stuff on it.

Mike
 
Re: OUTRIGHT BUY! 15W RF EXCITED CO2 BURNING LASER

Ok I understand completly I think you tried to tell me that before. the ceramic is strong enough gothcha thanks :D
 
Re: OUTRIGHT BUY! 15W RF EXCITED CO2 BURNING LASER

UPDATE! i got the PWM's from tottish, the cost of these units are $22.50 delivered to anyone who needs them.
 
Re: OUTRIGHT BUY! 15W RF EXCITED CO2 BURNING LASER

NS -- What's there to show but a pipe ??? I'm designing the driver housing which will be attached under the pipe.

Not much to see .

Mike
 

Attachments

  • CO2-1.jpg
    CO2-1.jpg
    9.5 KB · Views: 96
Re: OUTRIGHT BUY! 15W RF EXCITED CO2 BURNING LASER

I will have to machine the fins on the heatsink to comnform with the pipe so the power supply isn't too deep. I also have to build the battery holders for 8x 18650 cells to mount on both sides.

Mike
 
Re: OUTRIGHT BUY! 15W RF EXCITED CO2 BURNING LASER

Chris ---

What's the problem with the 2 Watt tubes? Low on gas? Can they be re-gassed?? Might be fun to try.

Mike
 
Re: OUTRIGHT BUY! 15W RF EXCITED CO2 BURNING LASER

I just happen to have a tank of "Crazy Mike's CO2 gas mix"  I made it years ago with He, N2 and CO2.    It might still work !!

Mike

I think that a few of us have gone beyond the GB here. I'm opening a thread in the "other color" forum here for discussion of operation and fixes.
Chris still has stuff to sell and we just clutter it for him.
 
You must log in or register to reply here.


Back
Top