Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Pinout m101u29

Joined
May 15, 2010
Messages
1,307
Points
48
What is the pinout on this ? And is it case negative/posative/neutral ?

Thanks
 





Nexgen

0
Joined
Nov 11, 2016
Messages
313
Points
43
They are case negative. It makes so many trouble putting them into host.
Right pin is positive.
 
Joined
May 15, 2010
Messages
1,307
Points
48
Do you have a diagram on which the right pin is, in which position the LD is ?
 

Nexgen

0
Joined
Nov 11, 2016
Messages
313
Points
43
Like this:
 

Attachments

  • 9B522C66-6ACA-4312-A0CC-D2A14BBB0AB8.jpeg
    9B522C66-6ACA-4312-A0CC-D2A14BBB0AB8.jpeg
    63.2 KB · Views: 5
Joined
Sep 20, 2013
Messages
17,253
Points
113
This is also the pinout for all the LPCs. Like the LPC816, 826, 836 840. I use the CG adjustable X-Drive from lazeerer. It is my favorite driver for case negative diodes.
 
Joined
Sep 20, 2013
Messages
17,253
Points
113
Sorry, I don't. As far as I know these drivers have been discontinued. I had a couple from about three years ago when I purchased several from Angelos. But, he is not making these any longer. That's too bad as it is a great driver. I have them in many of my builds. I even used one in an M140 build for vortish several years ago because it was going into a 501B host and I needed to limit the current to 1.5 amps.
 
Joined
May 15, 2010
Messages
1,307
Points
48
All the good drivers are sadly not available, the mohgasm drivers were good too
 
Joined
Sep 20, 2013
Messages
17,253
Points
113
I should send Angelos an email and see if he responds. Who knows what he might have lurking in his stockpile. He must be still around as these X-Drives and SXD drivers are all his.
 




Top