PGL H 589 module

[badboybilly]

Just an inside look at the 26mm 589 for anyone interested!

I’ll add some pics later here are a few short vids!

https://youtu.be/zWCB4CqJVtY

https://youtu.be/WmVkgg5wemM

https://youtu.be/hhEx3F8C1Sg

https://youtu.be/-1FVuUBN1sA

I will add that the driver gets very warm after 30 seconds on this module much warmer than the brass around the c mount diode, 90 seconds and driver aluminium ring is too hot to touch!

 

[BobMc]

Thanks for the "looks/see" love the 589 beam. Such a pretty color. :drool:

 

[Nexgen]

Nice! But why the beam is crooked, or it seems just like crooked?
Overall, nice tear down

 

[ultimatekaiser]

It has to do with the way it was aligned-the OC is curved so if it isn't spot on then the beam leaves at a slight angle. though you shouldn't have opened that module, a lot of CNI's modules are moisture sensitive so you shouldn't have unsealed it except for repairs...they've got sealant on the threads for a reason. (or at least they should, you never know with cheap-ish lasers) Cool vids though of the inside, just be careful not to jostle anything as those screws are terrible at holding things in place sadly.