O-like seems fishy

[lowell389]

Not quite sure of which Search you see at the Bottom
of the Forum page...:thinking:

All I see is the Forum [Search] button at the Top of
Forum Pages along with the Google Search Bar also
at the Top of Forum Pages....:undecided:


Jerry

You can contact us at any time on our Website: J.BAUER Electronics

My mistake , there used to be a googl search bar down there.
I should have looked before writing the post.

 

[sjkuessel]

I agree. Olike is fishy. I bought a laser from them. It's a great laser. I paid for it then waited. I contacted Susie to see if it was shipped but never got any confirmation. Then one day it showed up.

 

[zazman69]

I agree. Olike is fishy. I bought a laser from them. It's a great laser. I paid for it then waited. I contacted Susie to see if it was shipped but never got any confirmation. Then one day it showed up.

it showed up and.......? how was it?!?!?! lol by all means gives us some info! :yh:

 

[lasersbee]

I agree. Olike is fishy. I bought a laser from them. It's a great laser. I paid for it then waited. I contacted Susie to see if it was shipped but never got any confirmation. Then one day it showed up.

What is so "fishy" about ordering an item from a reputable
company from the other side of the globe and receiving
what you bought...:thinking::thinking:

I would call that GOOD Service.... nothing fishy about that...


Jerry

You can contact us at any time on our Website: J.BAUER Electronics

 

[sjesper]

I agree with LaserBee.

I find o-like's service really good, and yes i have tried their customer service.

Some month ago i bought a 150mW green laser that was said to be >125mW. When i first received it, it all seemed to be fine, but after some time i found out that it was TEM jumping. It looked like it went from TEM00 to TEM10 or TEM01 and sometimes meaby even TEM20.

I didn't found it fair that i paid $100 for a laser that was that unstable so i decided to contact Susie. I wrote to her that it was TEM-jumping and the next message i received from her was this:

It should be crystal problem ,we will send you a new module for replacement

Then i waited about 5 days for it to arrive. I found out that she sent it as express mail (++). I quickly turned it on and saw that it was little bit dimmer than the other module, but i didn't mind as i couldn't test the power of it.

Then some month later i decided to buy a BlueFan Basic LPM 2W, and i was finally able to see the real power of this laser. When i tested it i found out that it was stable at 120mW so that means it was 5mW underspec. I wrote to Susie about this and we came to compromise where she sent me $20 to refund the me. I found that fair and i'm now waiting for the money to come (got a mail saying they will come width 10-20 days).

So my overall experience i good

 

[lasersbee]

How about a link to the actual Laser you bought...


Jerry

You can contact us at any time on our Website: J.BAUER Electronics

 

[sjesper]

I can't see how that's important as i just vouched for O-Like's service, but it was a 150mW Power Rock Green laser. I can't link it as it isn't on their website anymore.

Was just saying that if the laser is underspec Susie will most likely find a solution with you.

 

[cheech226]

just to get this correct sjesper. you say that susie is sending you back $20 because your laser is 5mW underspec?

 

[sjesper]

just to get this correct sjesper. you say that susie is sending you back $20 because your laser is 5mW underspec?

Well.. yeah. If u look at it like that it seems to be really minor, but i looked at it in this way: I bought a 150mW laser that was confirmed to be atleast 125mW so i was kind of expecting it to be about 150mW. And 5mW out of 125 is 4% underspec which isn't too minor if i should say it

 

[lasersbee]

I can't see how that's important as i just vouched for O-Like's service, but it was a 150mW Power Rock Green laser. I can't link it as it isn't on their website anymore.

Was just saying that if the laser is underspec Susie will most likely find a solution with you.

Since you asked....
I find it important to know what you actually purchased since you
stated that you used the specs to get a refund because your laser
was underspec by your stated 5mW. I like to see things for myself...:beer:

Well.. yeah. If u look at it like that it seems to be really minor, but i looked at it in this way: I bought a 150mW laser that was confirmed to be atleast 125mW so i was kind of expecting it to be about 150mW. And 5mW out of 125 is 4% underspec which isn't too minor if i should say it

Perhaps your LPM is reading low... As far as I've read the LPM
you are using has a +/- 5% accuracy when it is new. That easily
fall into your discrepancy...

just to get this correct sjesper. you say that susie is sending you back $20 because your laser is 5mW underspec?

I find a $20.00 refund for a 5mW non confirmed low reading of
his laser seems a bit odd as well...:undecided:


Jerry

You can contact us at any time through our Website: J.BAUER Electronics

 

[sjesper]

Since you asked....
I find it important to know what you actually purchased since you
stated that you used the specs to get a refund because your laser
was underspec by your stated 5mW. I like to see things for myself...:beer:

Oh. Sorry if i sounded rude/arrogant. When i just saw ur post i thought u was saying it like my post was totally irrelevant without a link to the laser.

Perhaps your LPM is reading low... As far as I've read the LPM
you are using has a +/- 5% accuracy when it is new. That easily
fall into your discrepancy...



I find a $20.00 refund for a 5mW non confirmed low reading of
his laser seems a bit odd as well...:undecided:

It could be reading low, but again - i was hoping and almost certain that i would get a 150mW laser as it was the name of the laser. Again 125mW was what it should be atleast and when i saw the output was a little under (or atleast that's what my lpm says.. or.. read) i thought i would contact Susie.

This also proves to me that the service is great, or atleast for me it was great

 

[Bionic-Badger]

Susie must be running some huge margins to refund 20% of the price of a laser on a 5mW power deficit (4%), tested "some months later," on a laser technology that can vary in power output just by the temperature of the air in the room.

 

[sjesper]

Susie must be running some huge margins to refund 20% of the price of a laser on a 5mW power deficit (4%), tested "some months later," on a laser technology that can vary in power output just by the temperature of the air in the room.

Listen, i'm not here to argue about if Susie did a good job satisfying her customer, but if u really want to dig into this then here's some other facts.

- The laser had an IR output of 15mW which means it was outputting 105mW 532nm for a 150mW 532nm laser.
- The test was done 3 times on 2 days at normal room temperature with the same result.

I really didn't thought u guys would be this skeptical getting me to explain more about the situation, and if the laser would degrade 20mW in a few month, i would seriously complain... And i'm not repeating me on the rest of the things i said in the other replays, so read them if u havn't already.

Peace :angel: (I have no idéa why i just said peace o.o)

 

[lasersbee]

Listen, i'm not here to argue about if Susie did a good job satisfying her customer, but if u really want to dig into this then here's some other facts.

- The laser had an IR output of 15mW which means it was outputting 105mW 532nm for a 150mW 532nm laser.
- The test was done 3 times on 2 days at normal room temperature with the same result.

I really didn't thought u guys would be this skeptical getting me to explain more about the situation, and if the laser would degrade 20mW in a few month, i would seriously complain... And i'm not repeating me on the rest of the things i said in the other replays, so read them if u havn't already.

Peace (I have no idéa why i just said peace o.o)

You seem to be offended that we don't take you
at face value...

You are on a public Forum and we only know what
you post.
When the numbers don't seem to add up or sound
a bit off the members here will ask for additional info.

It is the way this Forum works...

You either stand behind what you posted and reply
to questions or you state that you are offended and
won't answer anymore questions. The choice is yours.

Either way the Forum members will make up their
own minds as to the veracity of the member and his
posts..


Jerry

You can contact us at any time on our Website: J.BAUER Electronics

 

[cheech226]

Quote:
Originally Posted by cheech226
just to get this correct sjesper. you say that susie is sending you back $20 because your laser is 5mW underspec?
Well.. yeah. If u look at it like that it seems to be really minor, but i looked at it in this way: I bought a 150mW laser that was confirmed to be atleast 125mW so i was kind of expecting it to be about 150mW. And 5mW out of 125 is 4% underspec which isn't too minor if i should say it


+1 to o-like

 

[sjesper]

You seem to be offended that we don't take you
at face value...

You are on a public Forum and we only know what you post.
When the numbers don't seem to add up or sound
a bit off the members here will ask for additional info.

It is the way this Forum works...

You either stand behind what you posted and reply
to questions or you state that you are offended and
won't answer anymore questions. The choice is yours.

Either way the Forum members will make up their
own minds as to the veracity of the member and his
posts..


Jerry

You can contact us at any time on our Website: J.BAUER Electronics

Wow. I like ur coloring , let me do the same. :beer:

Ur right. But i just didn't like the tone on the messages (Or wth am i talking about, it's an online forum, but i hope u get what i mean)

Hmm i'm surely gonna use that coloring more often. Meaby with another color. Or that seems to be a little off-topic.. Nvm!

Out