Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

O-like module 445nm

lasersbee said:
Hey Firefly...

The O-Like Module comes with one (1) Lens assembly ONLY...
The picture of the 2 lense assemblies is ONLY to show both ends of
the lens assembly in one (1) photo...

Each Lens assembly is made from 3 optic elements (lenses) and a
housing to hold them...

YOU ONLY GET ONE (1) LENS....

That's all she wrote.....:whistle:

Jerry
Click to expand...

look below this Jerry this is from o-like
Hello,
pls check attached file,some reference
http://cjoint.com/?hEmczgjKOo

Hello,sir,
it is 3 lens in metal,and the diameter is 8.84mm
 
Last edited:





Firefly said:
look below this Jerry this is from o-like
Hello,
pls check attached file,some reference
http://cjoint.com/?hEmczgjKOo

Hello,sir,
it is 3 lens in metal,and the diameter is 8.84mm
Click to expand...

I don't need to check it... I have 5 of these O-Like Modules
in my shop... I know what I received from O-Like...

That's what I just stated....

You get ONLY ONE (1) Lens Assembly with 3 Optic elements
inside...

Do you have another question...:thinking:


Jerry
 
Oups sorry I have not read correctly

1 lens assembly with 3 optics it's ok, and have you tested with a 445 diode?
 
I have 2 of that houses.
I ordered 2, and then I also ordered 2 lenses from aixzis .

There IS lenses with the o-like houses, I does actually dont se much different beams with the o-like and the aixzis lenses.

200720102487.jpg


200720102485.jpg


200720102481.jpg



The O-like is OK for normal short term use..
But if you plan to use it longer than 5-10 minutes you WILL need more cooling.
I also have the lab style houses for my 445
060720102444.jpg


I left my O-like and the LAB style house with the diode running at 500mA for about 10 minutes, the LAB style was cold as ice, but the O-LIKE was so hot you could almost not touch it with your hand !!
And that was with 500mA only !


Cheers
 
liteglow said:
The O-like is OK for normal short term use..
But if you plan to use it longer than 5-10 minutes you WILL need more cooling.

I left my O-like and the LAB style house with the diode running at 500mA for about 10 minutes, the LAB style was cold as ice, but the O-LIKE was so hot you could almost not touch it with your hand !!
And that was with 500mA only !


Cheers
Click to expand...

The mini heatsink fins on the O-like modules are meant for low power lasers, such as 120mW blu-rays (PHR-803t)
 
You must log in or register to reply here.


Back
Top