Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

New to dildas :)

so..it's ONLY too SHORT...but the width of cr123 are ok for the dilda.....!a good mod couuld be to use a longer tube..to put 2 cr123...at 3.6.

so 3.6v ----> more power
cr123r-----> more mah ....and more light duration and usage for the dilda..
 





realista said:
so..it's ONLY too SHORT...but the width of cr123 are ok for the dilda.....!a good mod couuld be to use a longer tube..to put 2 cr123...at 3.6.

so 3.6v ----> more power
cr123r-----> more mah ....and more light duration and usage for the dilda..
Click to expand...

The CR123R batteries diameter of 0.650" is too large to fit into the Dilda..
The Dilda inside diameter with battery clearance is 0.600".....8-)

Hey... With some modification....
You could add some wires to the driver and connect it to a 12Volt car battery in a Back-Pack
carried on your back through a variable Power supply to give you the voltage you wanted...  ::)

The laser would work for a really long time... but the battery may become uncomfortable
over time.... ;D ;D ;D

Jerry
 
givemesome said:
According to DX my items are ready, I'm going to get them fast hopefully :)
Click to expand...

No, you won't :)
I am also from Hungary and the last order from DX arrived in 3 weeks.
 
BeavRat said:
If you order the dilda from o-like, won't customs confiscate it?
Click to expand...
Hi, I am in the US and have ordered the dilda from O-like. It arrived in standard Chinese delivery expectations (2-3 weeks) in great condition.
 
So i finally received it. Is it normal that I can't see clearly the beam on the night sky and I can't burn green matches?
 
givemesome said:
So i finally received it. Is it normal that I can't see clearly the beam on the night sky and I can't burn green matches?
Click to expand...


Yes.  

Red is difficult to see in the air.  

Use a black marker to darken the matches.  Green doesn't absorb the red light very well.  Also, be sure that you are focusing it as small as possible AND holding it very steady

Peace,
dave
 
Got it, focusing is harder than I expected :) Black marker didn't help much, it evaporated before the match lit xD With right focusing it was instant.
 
I just measured 202mw on 2.9V Varta professional lithium batteries. My ultrafire CR2s just arrived, hopefully I measure the dilda with those too :) Thanks DX xD
Any nice solutions to the wobby head?
 
For the wobbly head.... you can use a few layers of Teflon tape
on the lens threads... (the kind for plumbing fittings)... 8-)

Jerry
 
givemesome said:
I just measured 202mw on 2.9V Varta professional lithium batteries. My ultrafire CR2s just arrived, hopefully I measure the dilda with those too :) Thanks DX xD
Any nice solutions to the wobby head?
Click to expand...
fix to wobbly head-- teflon tape
 
Teflon tape fix done, thanks for the tip :)
How can I clean the lens and the diode? I can see small dust particles on it when it's a bigger "dot" (actually circle :) ).
 
givemesome said:
Teflon tape fix done, thanks for the tip :)
How can I clean the lens and the diode? I can see small dust particles on it when it's a bigger "dot" (actually circle :) ).
Click to expand...

Pressured air would help I guess. Have you measured the mA used at 202mW? Please do it if possible.
 
You must log in or register to reply here.





Back
Top