Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

NEW copper Aixiz for G8 lens

Joined
May 12, 2017
Messages
961
Points
93
Hi,i see G8 have a problems with focus beam,focus length is very short
Therefore, they are really unsure, I have the idea of a new AiXiz, they are longer and work better on G8, and they will also work very well on G2 as well as other lenses, G7, 2el, 3el, etc .....


My design parameters:
Diameter:11.95m +- 0.01mm
Length: 13.49mm+-0.01 (old Aixiz is 11,5mm,new is longer 1,99mm,4 rounds thread)
Thread M9x0.5
Material: copper C1100
I will machine 100pc 5.6mm and 9mm00000IMG_00000_BURST20190807152210608_COVER.jpg00100dPORTRAIT_00100_BURST20190807152238329_COVER.jpgIMG_20190807_152125.jpg00100dPORTRAIT_00100_BURST20190807214912263_COVER.jpgIMG_20190807_215154.jpgIMG_20190807_215210.jpg00100dPORTRAIT_00100_BURST20190807181849910_COVER.jpg
 

Attachments

  • IMG_20190807_234337.jpg
    IMG_20190807_234337.jpg
    275 KB · Views: 11
  • IMG_20190807_205045.jpg
    IMG_20190807_205045.jpg
    73.9 KB · Views: 12
  • IMG_20190807_205847.jpg
    IMG_20190807_205847.jpg
    132.9 KB · Views: 11
Last edited:





Spoomples

Member
Joined
Dec 8, 2018
Messages
54
Points
18
Better thread engagement for the longer focal length lenses sounds nice. Are you planning on selling what you machine?
 
Joined
Jan 29, 2014
Messages
12,031
Points
113
I didn't see your post before I did, 99% is plenty pure enough, no real difference between that and 100% pure. I'd like to see some built for a 12.7 mm diameter lens, but much to be discussed before settling on the size, I suppose same thread pitch though. The main thing to determine is what is the most common lens diameter above the ~6.33 diameter aspheric lenses being used now, I'm not sure 12.7 mm would be the best choice.
 
Joined
May 12, 2017
Messages
961
Points
93
I didn't see your post before I did, 99% is plenty pure enough, no real difference between that and 100% pure. I'd like to see some built for a 12.7 mm diameter lens, but much to be discussed before settling on the size, I suppose same thread pitch though. The main thing to determine is what is the most common lens diameter above the ~6.33 diameter aspheric lenses being used now, I'm not sure 12.7 mm would be the best choice.

Yes, I am planning to make an aixiz 15mm for a new lens wider and have a longer focal length
 

irish303

Active member
Joined
Jul 26, 2019
Messages
93
Points
28
Nice sketch Trin , you've used Autodesk Fusion 360° ?
G-8 lens it is different from the G-2 one, it makes the laser point rounder rather than a horizontal line, but maybe it will depend on the fact that the 5W diodes upwards emit that type of beam (will it be given by the power?)
 

Sherako

New member
Joined
Jun 18, 2019
Messages
29
Points
3
I'm interested in a 510 threaded heatsink I can press a module from dtr in it and I can screw it into a box mod with 2 18650's in series (noisy cricket most likely). Does this still exist/can you make it for me? :)
Also if I just put it on a regular box mod that like I can control the wattage would that work? I know the driver would limit it to under 2.4a but I'm interested in what the chip inside the mod would read out or if it just wouldn't like it. (Would be cool to have control on output power besides just <2.4a)
 




Top