madmacmo
0
- Joined
- Dec 28, 2009
- Messages
- 284
- Points
- 63
FYI - the link below to a somewhat interesting new 1 Watt 445nm LD; however the given price is not so interesting , nor is the CW version's max rated output at only 1.5 watt
I just wonder how much these might be over driven to achieve higher output but with the short duty cycles with which we are accustomed. At $400 a pop it would be an expensive task for any trial and error experimenting.
Laser diode from ELK Industries does not require TE cooling - Laser Focus World
Quote:
The new Blue Max Laser diode, LD 2445, produces 1 W of blue, 445 nm output. A 1.5 W, CW version is also available. The laser diode can operate at <27°C, at room temperature of 25°C, and uses a small heat sink (4 × 4 × 1 in.) with no TE cooling required. The OEM modules measure 4 × 4 × 6 in. with FDA/CDRH/IeC versions available.
ELK Industries
Melbourne, FL
laserob@aol.com
Quote:
The LASER Diode LD 2445 is so very efficient, that it can operate at a cool temperature (<27 degrees, C), at room temperature of 25 degrees, C, using a relatively small heat sink (4" x 4" x 1"). Therefore, TEC cooling is not required at all. The OEM Modules are very small, lightweight, rugged, and compact, measuring 4" x 4" x 6".
__________________
There is nothing permanent except change - Heraclitus of Ephesus c.535 BC - 475 BC
-The first problem in any design situation is to discover what the problem really is - Unk.
-Science is nothing but developed perception, interpreted intent, common sense rounded out & minutely articulated - George Santayana 1863-1952
-There is no adequate defense, except stupidity, against the impact of a new idea - Percy Williams Bridgman 1882 – 1961
-Ignorance Simplifies ANY Problem - R. Lucke
I just wonder how much these might be over driven to achieve higher output but with the short duty cycles with which we are accustomed. At $400 a pop it would be an expensive task for any trial and error experimenting.
Laser diode from ELK Industries does not require TE cooling - Laser Focus World
Quote:
The new Blue Max Laser diode, LD 2445, produces 1 W of blue, 445 nm output. A 1.5 W, CW version is also available. The laser diode can operate at <27°C, at room temperature of 25°C, and uses a small heat sink (4 × 4 × 1 in.) with no TE cooling required. The OEM modules measure 4 × 4 × 6 in. with FDA/CDRH/IeC versions available.
ELK Industries
Melbourne, FL
laserob@aol.com
Quote:
The LASER Diode LD 2445 is so very efficient, that it can operate at a cool temperature (<27 degrees, C), at room temperature of 25 degrees, C, using a relatively small heat sink (4" x 4" x 1"). Therefore, TEC cooling is not required at all. The OEM Modules are very small, lightweight, rugged, and compact, measuring 4" x 4" x 6".
__________________
There is nothing permanent except change - Heraclitus of Ephesus c.535 BC - 475 BC
-The first problem in any design situation is to discover what the problem really is - Unk.
-Science is nothing but developed perception, interpreted intent, common sense rounded out & minutely articulated - George Santayana 1863-1952
-There is no adequate defense, except stupidity, against the impact of a new idea - Percy Williams Bridgman 1882 – 1961
-Ignorance Simplifies ANY Problem - R. Lucke
Last edited:
