need host

[BobMc]

I just got my hands on a 2watt 445nmmodule, with/xdrive,and a g-2 glass lens it also has 510 threaded end could anyone suggest a appropriate host.? thanks

 

[Lifetime17]

Hi,
For a 2 w drop in a Sky Ray S-R5 would be sufficient . Or a 501B with a good heat sink. 2W you can get away easy at low cost . check out survival lasers , Gary sells all the stuff you need for that. he has a nice S4 host with a copper sink and a battery exstention tube to power the build with 2- 18650's . The aluminum host would be better off with sinking compared to the Stainless steel ones.

rich

 

[Dutch67]

Look at survival lasers. They have a nice cheap C6 host that works perfect for these diodes.

 

[BobMc]

Ok, thanks, I forgot to mention it has a 510 threaded end they sell these at dtr. Will check the s4 and the c6 hosts. Thanks again I'm on it

 

[VirtueViolater]

Any vape mod that will hold the proper battery voltage

 

[BobMc]

I know, I tried one,used a sleeve and two 123a batteries,worked great, only thing is all I could find were the units with a momentary switch. Need something with an on and off.But it worked great!

 

[Lifetime17]

Hi Bob,
Try modding a 501B with a 510 male set i did a few for the clicky on/off button.

 

[BobMc]

Sounds great, I'll give it a try! thanks, Bobmc

 

[Lifetime17]

Hi Bob,
See in the first the 510 copper piece was from a mech mod copper penny . i took that and fit it by sanding the copper down to fit the 501B host. It's a little work but thats what this hobby is all about.

Rich

 

[BobMc]

Thanks for the heads up,ordered one.!