BlackOps
0
- Joined
- May 7, 2016
- Messages
- 139
- Points
- 28
True, but i will go for the 10280 as the aixiz module is gonna be complete, there is absolutely no space inside the aixiz module as i will fit a driver in there, and LD ofcourse and 2 computer IC's including an LDO BMS and a 12F519 micro processor. Very tight fit. And i drilled a bigger hole on the back of the aixiz tube where the 2 wires come out for the 5mW module, this hole is going for the spring, and a 10280 would fit perfectly as i measured everything. I'm still waiting for a diode but i also bought a cheap blue ray pen just in case i screw up, so i could take that diode and driver out and use it as failure rates are lower at this point. And i don't think i will ever make such small thing with this many features in themIf you have 18mm length by 10mm width you could use a 10180 batt there only 70mAh each but they are small enough to fit in the back of an aixes module.
I'm thinking of making some ultra high power 405/445nm lasers with the same features in them, with a PIC ic to add some modes (constant, strobe, low power, mid power and max power)
Watertight of course and make it as solid as possible, and sell them.
It would be bigger of course, but i will also underpower the diode so it would last, but whenever i make one and someone is interested, i can even overpower it, if you want it. And i can program the ic to their needs. But this would be in the future (late 2016 early 2017)
I will even make the aixiz glass lens assembly watertight, or any lens you want. I can make them all watertight, and shock resistant. Host would be bigger of course as this is a nightmare to assemble and make. Still not done yet as i need the diode.