Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

My Nubm44 build

BobMc

0
Joined
Apr 23, 2016
Messages
3,685
Points
113
Still very impressed with your build. :gj: Your are correct cooler is better. Would love to get some run times, you can get out of your build. Here's to hoping you get close to another 8watts out of your new driver. Keep us apprised. :)
 





Joined
Jan 29, 2014
Messages
12,031
Points
113
If you keep the diode cooler, you can safely increase the current up to their stated max for CW for more output power.
 
Joined
Feb 2, 2012
Messages
577
Points
43
If you keep the diode cooler, you can safely increase the current up to their stated max for CW for more output power.


I will start off at 4.5 Amps and see what it outputs. I should be able to do a graph this time and not just show the meter reading. After some stuffing around the LPM software seems to be running on my Notebook now.

With the heatsinking I have it should have pretty much a continuous duty cycle. DTR has run the Numb44 at 5.5 Amps for a few minets. I should not have any problem running it up there.
 




Top