Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

My new 445 build with super efficient diode :D

Awesome :beer: i got one like that too it did 1.8W or so with a G-lens and at about 1-1.1A I chose not to crank it up :)

But i am sure curious what yours will do :beer:

greetings,,

EDIT: AnthoT allready showed it :p Anyhow my jaw fell on the floor when i took that reading :)
 
Last edited:





offroadfreak8582 said:
Awesome :beer: i got one like that too it did 1.8W or so with a G-lens and at about 1-1.1A I chose not to crank it up :)

But i am sure curious what yours will do :beer:

greetings,,

EDIT: AnthoT allready showed it :p Anyhow my jaw fell on the floor when i took that reading :)
Click to expand...

Me too, I was just looking at the LPM, it passed 1W I was satisfied but it kept goin up & then settled at 1.42W O_o it's a tiny host so it quickly drops down to ~950mw after about a minute, even though the 1.42W lasts about 25 seconds ( + the 15 second response time it's likely there for ~40 seconds :D )
But I too can't wait for the new reading! The saik from DX just landed in Canada according to tracking, just waiting for new driver :eg:
 
That maybe because you're using a linear driver, and linear drivers tend to overheat quickly.. therefore just changing the driver to a cool running buck driver would make a lot of difference in the same host..
 
sinner said:
That maybe because you're using a linear driver, and linear drivers tend to overheat quickly.. therefore just changing the driver to a cool running buck driver would make a lot of difference in the same host..
Click to expand...

Yeah I would agree, I had this driver on hand & it fit so I used it, the saik will have a Foulmist boost :D


LPM video, this is from a cold start,

 
Last edited:
And so I kept this laser on my air conditioning fan for the last 20 minutes, didn't put it in the freezer & the air conditioning doesn't condensate the lens or diode so this is what outputed :eg:

7852742892_da157478f5.jpg


That's as high as I got it, I've been trying ever since I built it to get the power to peak as high as possible & it finally hit 1.6W ( drastically cooled though :D ) still a glass lens :eg: in waiting for that saik now :D
 
^^ Yep, Ive been known to do the air conditioner trick myself! Thanks for sharing! :)
 
Sooooo,
Here's a little sneak peak before I make my review thread... With my glass 2 element lens @ 1.84Amps...

7890311700_80e6388510.jpg

:whistle: :D:D:D:D:D
What if I had a G lens :O
 
could be anywhere from 25%-31% , lets say you're blessed with this unique diode for now.. Awesome build!
 
You must log in or register to reply here.


Back
Top