Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

My First PHR From Scratch

Eudaimonium you have way toooo many flash lights 98 is just tooo many for any one person to have, heck I only have about 36 you need to see professional help :na: or maby just make many of them into lasers :crackup:

@ darkzero very nice host ;) and welcome to the forum :wave:
 
Last edited:





Flaminpyro said:
Eudaimonium you have way toooo many light you need to make many of them into lasers :crackup:

@ darkzero very nice host ;) and welcome to the forum :wave:
Click to expand...
I WISH!!!

It's his lights, I embeded them from one of the links he posted here.

Lemme change my post to avoid confusion!
 
O that makes things different :crackup: I looked befor I posted and couldn't see them in any one elses post ? O well...
 
Flaminpyro said:
O that makes things different :crackup: I looked befor I posted and couldn't see them in any one elses post ? O well...
Click to expand...
OP posted some links to his album on CPF, so I took a look and I saw that.

So I linked and commented.

Sorry for confusion!
 
Eudaimonium said:
DOOOODE

This is all your light?!

You gotta be kidding me!
:drool:

+rep from me also on OP!
Gotta turn more of them into lasers, darkzero!!
Click to expand...

Yes those are all mine. Most (but not all) of the others in the other galleries are mods I have done for others.


Flaminpyro said:
Eudaimonium you have way toooo many flash lights 98 is just tooo many for any one person to have, heck I only have about 36 you need to see professional help :na: or maby just make many of them into lasers :crackup:

@ darkzero very nice host ;) and welcome to the forum :wave:
Click to expand...

Thanks for the welcoming. Wow you counted all of them in that pic, 98 huh? That pic is probably 2 years old, many more have came & gone but not much have gone as I tend not to sell them. The last time I counted I think I was at 130+ but I have sold some since then. 99% never leave the house cause I'm afraid to scratch them. Many people have told me I do need counseling. Ya whatever, there are people that are far worse than I am.

Here's another pic of them:
desk2.jpg




TTerbo said:
hey ,
how much was your mini lahte?
cheers
Click to expand...

My mini is $699USD regular price. I got it on sale & used a 20% off coupon & got it for $358 w/ tax out the door. But that was just for the lathe only & did not include the backsplash, larger chuck, QCTP, tooling, etc. The chuck alone used cost more than the lathe ($1k new).

Img_1254.jpg
 
Its a very nice build indeed!

I like the finned-all-over design - it might not be 100% useful, but it sure looks like it is. Is it good enough to run cw without heating up problematically?
 
Benm said:
Its a very nice build indeed!

I like the finned-all-over design - it might not be 100% useful, but it sure looks like it is. Is it good enough to run cw without heating up problematically?
Click to expand...

My thoughts exactly. Could never understand the usefulness of a high powered laser & justfy the time to make something like this. That has changed a bit now so I'll do more.

I built this one with the intention of having decent life. I see that people recommend 90-100ma for PHRs to have decent life? So paired with good heatsinking I hope 110ma might still be a good compromise?

The Aixiz module is epoxied to the heatsink with thermal epoxy. I also potted the back of the diode & the driver with thermal epoxy. The brass contact can is also epoxied to the heatsink with thermal epoxy. Heat would also be disappated from the front of the heatsink contacting the head & from the brass can making ground contact to the body.



Uberstrobe said:
That is one FINE chuck. O_O I want one. Very nice.
Click to expand...

I know the price is scary but aside from being absolutelty drop dead gorgeous, the chuck is of very high quality & well worth the money. With the Set-Tru, TIR is guaranteed to be 0.0004", I'm getting about 0.0002". Once you use one you'll want nothing else. I love it so much I got one for the new lathe, bigger & brand new this time at just about $1K.

5" & 6.25"
Img_6963.jpg
 
darkzero said:
My thoughts exactly. Could never understand the usefulness of a high powered laser & justfy the time to make something like this. That has changed a bit now so I'll do more.

I built this one with the intention of having decent life. I see that people recommend 90-100ma for PHRs to have decent life? So paired with good heatsinking I hope 110ma might still be a good compromise?

The Aixiz module is epoxied to the heatsink with thermal epoxy. I also potted the back of the diode & the driver with thermal epoxy. The brass contact can is also epoxied to the heatsink with thermal epoxy. Heat would also be disappated from the front of the heatsink contacting the head & from the brass can making ground contact to the body.





I know the price is scary but aside from being absolutelty drop dead gorgeous, the chuck is of very high quality & well worth the money. With the Set-Tru, TIR is guaranteed to be 0.0004", I'm getting about 0.0002". Once you use one you'll want nothing else. I love it so much I got one for the new lathe, bigger & brand new this time at just about $1K.

5" & 6.25"
Img_6963.jpg
Click to expand...
Tool Envy Syndrome is so hard to cope with some times.
I think the girl has to go i have a new love. (the chuck of course)
 
I'm very interested in an aluminum make of that exact host. Would you be willing to make one? Send me a PM so we can talk :)
 
You must log in or register to reply here.





Back
Top