Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

my first build check my plan¡¡¡¡






Dogs Best Friend said:
Another idea... Since you are going to be spending $12 on a driver, about $30 on a heat sink, putting a lot of work into the C8 pill (and finding a brass ring), buying thermal adhesive, silicone wire, and other things. A much easier option would be to order the whole "just add diode kit" kit from Moh, and the diode itself from DTR or Clif at Cajunlasers.

Aurora C6 Just Add Diode Kit - $35.00 : Mohgasm!, Because it feels so good.
Click to expand...

how the linear driver from mohgasm works better with 1x18650 or with 2xcr123
 
Those are good goggles for 405nm and 445nm. Another forum member has done tests with an LPM and they block nearly all 445nm light. These are the glasses I use; all I can see is a faint yellow dot when I am wearing them. OEM certified glasses are better, but they cost 10 times more money. http://www.oemlasersystems.com/prod...tion/uv-visible/arg-uv-blu-ray-argon-blue-ktp

The Mohgasm linear and circular drivers require 2 lithium batteries to work properly. 2x rcr123 will work, 2x 18350 will be better.
 
Last edited:
Either one would be fine. They both have a very good reputation. I bought diodes from both of them several times and haven't had any problems yet. They both have good prices and ship very quickly. You might want to double check to make sure they ship to Mexico, but that aside, take your pick.
 
i changed my plan and is this

a just add diode c6 kit from mo.

a m140 diode from dtr

and 2xcr123 (or 1x18350)

:D
 
You have to use 2x 16340 (CR123) 3.7V size batteries with JAD kit..
What current did you choose and add a focus adapter too, it helps in focusing and also better heatsinking if the lens shell gets hot..
 
you will need 2 16340's to power the driver. One 18650 will not be sufficient enough.

EDIT: sorry didnt know a answer was given while i was reading/ typing :)
 
Last edited:
1x 18350 will also not work, you need atleast 7.2V i.e, 2x Li-ion (16340's)
 
jajajaj men sorry i was sure that i put 2x18350 finger error sorry :D what is better 18350 or cr123???
 
Sounds like you are on your way!
2x 18350s will be perfect. Buy good ones (AW are the best). Good batteries are worth the extra few dollars. Ultrafire batteries will work, but they are cheap. You will get more out of your laser with good AW batteries or some other name brand.

Also, protected batteries are a good idea if they fit. Anyone know if 2 protected cells will fit in the JAD C6 kit?
 
Last edited:
18350 cells are smaller than the cr123 i think 18350 protected cells can fit :D because the c6 kit is designed to 2xcr123
 
Last edited:
I just checked this morning, my protected 18350's are slightly longer (about 1-2mm) than an rcr123. So you are right, they should fit fine.
 
You must log in or register to reply here.


Back
Top