Mini Mag build

[Lifetime17]

Hi Was bored and turned these out one in copper and one in aluminum. The Aluminum has a M140 in it. The copper one is a plug n play not sure what to put inside yet, The aluminum Mini take 2-14500's and with have been changed to a rear clicky,,

Enjoy Rich

 

[BobMc]

Way to go Rich ! That's a good use of a mini-mag. Never heard of a 4500 before, figures you come up with some new coolness

 

[Lifetime17]

Hi BM,
Yes enough power for the M or A 140 diode set to 1.8A or power. My Al Mini does 1900+W's with 2=4500 cells/G2 lens..Thanks buddy

Rich

 

[Vision]

Nice! Also never heard of 4500's.

 

[dden4012]

14500 I'm guessing. Cool build Rich. How are you and fam doing up in the North?

 

[Lifetime17]

Hi,
Doing well D thank you and yes everyone BM and vision it takes 2-14500 AW's. Sorry had a brain fart for a moment was stuck on stupid when i posted. Mini Mags are a nice small build, fitting the pill is the hard part being it's very small to machine but challenging . Had these laying around for about 15 years from when my wife was working for the bank. Thanks for looking guys ..

Rich

 

[BowtieGuy]

Hi BM,
Yes enough power for the M or A 140 diode set to 1.8A or power. My Al Mini does 1900+W's with 2=4500 cells/G2 lens..Thanks buddy

Rich

Hey Rich, you could always buck the high power trend, and put a couple of nice single mode diodes in these Minis, maybe a PLT5 450nm, or an Opnext 638nm, or even a PL520B, I haven't seen any of those in builds recently!
Whatever you choose, I'm sure they'll look great.

This reminds me, I've got a couple of these mini mags from work from years ago, I think they were from a suggestion award or something.
I think a good suggestion would be to make a nice laser out of them!

 

[Lifetime17]

Hi BT,
Sounds like a great idea i love the SM diodes, these mini's take 2 cells so i would turn out a pill for it and press it in the batter tube just enough to take 1 cell or use a dummy cell behind the live one . I have a few Camo EDC's i'm working on in different Camo pattern for some SM diode

Rich

 

[Richie89]

Hi Was bored and turned these out one in copper and one in aluminum. The Aluminum has a M140 in it. The copper one is a plug n play not sure what to put inside yet, The aluminum Mini take 2-14500's and with have been changed to a rear clicky,,

Enjoy Rich

I absolutely love that heat sink!

 

[Lifetime17]

Hi Rich,
I just made
It
Smooth I will edit this post and turn some
Reliefs into it tonight . Glad your liked it
Rich

 

[Lifetime17]

Hi Richie,
Here you go i gave it a face lift it was to plain spruced up the sink with some reliefs and high polished ..

Rich