lens nut with 12mm thread

[weirdmeister]

already searching but nothing found...

i want to screw on a grating or lens and need a nut to screw in my laser like this:

Glass Lens for Aixiz 12x30mm Laser Modules and Cases | eBay

idea?

 

[Alaskan]

What do you need, the nut that goes on the end like on this: DIY 12 30mm 5 6mm Laser Diode Module Housing with Mutiwavelength Lens | eBay ?

 

[crazyspaz]

...What? I am not sure what you are asking..

 

[Alaskan]

I think he wants one of these to go on his lens:

 

[jimdt7]

If your are looking for what @Laser Project posted then here you go:
http://www.aixiz.com/store/product_info.php/cPath/28/products_id/370

Jim

 

[weirdmeister]

sorry for confusing...my laser output hole has an INNER diameter of 12mm so
i want to screw in a nut with OUTER diameter 12mm
so you found what im looking for..( 30x12 means the thread is also 12mm on the aixiz page?)
and the threads are all the same..thread? i mean 12x1,0 ...or some 12x1,5 or 12x0,5 ?

thanks

 

[jimdt7]

The ones I posted should work with any 12mm module and lens

Jim

Sent from my HTC One using Tapatalk

 

[Things]

The standard lens threads are M12x0.5

 

[weirdmeister]

ok,i see .....thank you

 

[Things]

It's not really a standard tap size, but there's plenty of them from China on eBay. Since they're such a fine thread it can be a bit difficult getting it started.